![](/v/vspfiles/templates/269/images/DBox_Border_Left_Bottom.gif) |
![](/v/vspfiles/templates/269/images/clear1x1.gif) |
![](/v/vspfiles/templates/269/images/DBox_Border_Right_Bottom.gif) |
![](/v/vspfiles/templates/269/images/DBox_Border_Left_MidDiv.gif) |
![](/v/vspfiles/templates/269/images/clear1x1.gif) |
![](/v/vspfiles/templates/269/images/DBox_Border_Right_MidDiv.gif) |
![](/v/vspfiles/templates/269/images/clear1x1.gif) |
Features
AC Output Voltage is 120 VAC, 60 Hz
Continuous Power Output is 1000 Watts
Pure Sine-Wave output can power two 1/2 HP gate operator systems or a single 1 HP system
DC Input voltage is 12 VDC
Operating temperature 23F (-5C) to 104F (40C)
Low voltage alarm 10.2 - 10.8 VDC
Uses two (2) Maintenance Free, Rechargeable, Non-spillable, Sealed Lead-Acid (SLA), 12-Volt, 35 AH.
IMPORTANT! Use only with gate operators that utilize PSC motors. Do not use with operators that utilize motors with seperate start and run windings.
|
|
![](/v/vspfiles/templates/269/images/clear1x1.gif) |
![](/v/vspfiles/templates/269/images/DBox_Border_Left_Bottom.gif) |
![](/v/vspfiles/templates/269/images/clear1x1.gif) |
![](/v/vspfiles/templates/269/images/DBox_Border_Right_Bottom.gif) |
![](/v/vspfiles/templates/269/images/clear1x1.gif)
|