ME110 is a streamlined sensing edge designed for applications where performance and appearance are key factors. When touched lightly, or at an angle, ME110 sends an immediate signal to stop and/or reverse operation. This slide-in style edge has multiple mounting channel options, allowing for easy installation with any style counter shutter or grille.

ME110 is a streamlined sensing edge designed for applications where performance and appearance are key factors. When touched lightly, or at an angle, ME110 sends an immediate signal to stop and/or reverse operation. This slide-in style edge has multiple mounting channel options, allowing for easy installation with any style counter shutter or grille.

Hard rubber end plugs for 3/8 and 1/2 inch hose.

Hard rubber end plugs for 3/8 and 1/2 inch hose.

ME110 is a streamlined sensing edge designed for applications where performance and appearance are key factors. When touched lightly, or at an angle, ME110 sends an immediate signal to stop and/or reverse operation. This slide-in style edge has multiple mounting channel options, allowing for easy installation with any style counter shutter or grille.

ME120 is ideal for a wide variety of applications, from motorized doors and gates to industrial safeguarding on manufacturing equipment. Applications include: along conveyor systems to detect operator reach in, below lifts to protect from pinch points, and on a wide variety of plant equipment where touch-sensitive detection is desired.

Tech Tip: The ME120 sensing edge paired with the ME120-C5 mounting channel creates a “sweep edge� that safeguards the entrapment zone on driveways and curbs along the path of travel below a swinging gate, as defined by UL 325 and ASTM F2200.

Hard rubber end plugs for 3/4 inch hose.

Hard rubber end plugs for 3/4 inch hose.

The ME117 sensing edge has an added layer of PVC, creating a hollow pocket on the bottom of the edge. This hollow pocket conforms to irregularities in the surface which help prevent dust and debris from passing the threshold. ME117 is designed to fit doors from 1 to 2-inch thick. When touch activated, ME117 sends an immediate signal to controls to stop and/or reverse operation. A mounting channel is available for easy installation on machinery applications.

The ME123 sensing edge is the industry’s go-to, two inch extruded edge designed to fit a variety of door applications. It is custom manufactured to specified color and length. When touched lightly, ME123 will send an immediate electrical signal to operator controls to stop and/or reverse gate operation. This slide-in style edge features a double-T mounting design which provides superior stability.

ME112 is a pressure sensitive sensing edge that is manufactured to user specifications for length and outlet location. When touched activated, ME112 sends an immediate signal to operator controls to stop and/or reverse door operation. This sensing edge retrofits easily to 1-3/8-inch sectional doors with accepting bottom bar, as well as multiple compatible mounting channels. This slide-in style edge features a double-T mounting design, which provides superior stability for sectional overhead commercial doors and material handling system applications.

ME113 is a pressure sensitive sensing edge that is custom manufactured to user specifications for length and outlet location. When touched activated, ME113 sends an immediate signal to operator controls to stop and/or reverse door operation. This slide-in style edge features a double-T mounting design, which provides superior stability for sectional overhead commercial doors and material handling systems applications.

ME112 is a pressure sensitive sensing edge that is manufactured to user specifications for length and outlet location. When touched activated, ME112 sends an immediate signal to operator controls to stop and/or reverse door operation. This sensing edge retrofits easily to 1-3/8-inch sectional doors with accepting bottom bar, as well as multiple compatible mounting channels. This slide-in style edge features a double-T mounting design, which provides superior stability for sectional overhead commercial doors and material handling system applications.

ME113 is a pressure sensitive sensing edge that is custom manufactured to user specifications for length and outlet location. When touched activated, ME113 sends an immediate signal to operator controls to stop and/or reverse door operation. This slide-in style edge features a double-T mounting design, which provides superior stability for sectional overhead commercial doors and material handling systems applications.

The ME123 sensing edge is the industry’s go-to, two inch extruded edge designed to fit a variety of door applications. It is custom manufactured to specified color and length. When touched lightly, ME123 will send an immediate electrical signal to operator controls to stop and/or reverse gate operation. This slide-in style edge features a double-T mounting design which provides superior stability.

ME113 is a pressure sensitive sensing edge that is custom manufactured to user specifications for length and outlet location. When touched activated, ME113 sends an immediate signal to operator controls to stop and/or reverse door operation. This slide-in style edge features a double-T mounting design, which provides superior stability for sectional overhead commercial doors and material handling systems applications.

ME113 is a pressure sensitive sensing edge that is custom manufactured to user specifications for length and outlet location. When touched activated, ME113 sends an immediate signal to operator controls to stop and/or reverse door operation. This slide-in style edge features a double-T mounting design, which provides superior stability for sectional overhead commercial doors and material handling systems applications.

The ME123 sensing edge is the industry’s go-to, two inch extruded edge designed to fit a variety of door applications. It is custom manufactured to specified color and length. When touched lightly, ME123 will send an immediate electrical signal to operator controls to stop and/or reverse gate operation. This slide-in style edge features a double-T mounting design which provides superior stability.

The MC22 sensing edge is custom manufactured to your exact specifications for length and outlet location. When touched lightly or at an angle, MC22 will send an immediate electrical signal to operator controls to stop, and/or reverse operations. Made with a vinyl wrapping and an extruded T, it is designed to slide into applicable door’s bottom retainer. The exterior of the MC22 is highly flexible and can conform to irregularities in the floor.

The ME123 sensing edge is the industry’s go-to, two inch extruded edge designed to fit a variety of door applications. It is custom manufactured to specified color and length. When touched lightly, ME123 will send an immediate electrical signal to operator controls to stop and/or reverse gate operation. This slide-in style edge features a double-T mounting design which provides superior stability.

The ME123 sensing edge is the industry’s go-to, two inch extruded edge designed to fit a variety of door applications. It is custom manufactured to specified color and length. When touched lightly, ME123 will send an immediate electrical signal to operator controls to stop and/or reverse gate operation. This slide-in style edge features a double-T mounting design which provides superior stability.

The ME123 sensing edge is the industry’s go-to, two inch extruded edge designed to fit a variety of door applications. It is custom manufactured to specified color and length. When touched lightly, ME123 will send an immediate electrical signal to operator controls to stop and/or reverse gate operation. This slide-in style edge features a double-T mounting design which provides superior stability.

ME112 is a pressure sensitive sensing edge that is manufactured to user specifications for length and outlet location. When touched activated, ME112 sends an immediate signal to operator controls to stop and/or reverse door operation. This sensing edge retrofits easily to 1-3/8-inch sectional doors with accepting bottom bar, as well as multiple compatible mounting channels. This slide-in style edge features a double-T mounting design, which provides superior stability for sectional overhead commercial doors and material handling system applications.

ME112 is a pressure sensitive sensing edge that is manufactured to user specifications for length and outlet location. When touched activated, ME112 sends an immediate signal to operator controls to stop and/or reverse door operation. This sensing edge retrofits easily to 1-3/8-inch sectional doors with accepting bottom bar, as well as multiple compatible mounting channels. This slide-in style edge features a double-T mounting design, which provides superior stability for sectional overhead commercial doors and material handling system applications.

ME112 is a pressure sensitive sensing edge that is manufactured to user specifications for length and outlet location. When touched activated, ME112 sends an immediate signal to operator controls to stop and/or reverse door operation. This sensing edge retrofits easily to 1-3/8-inch sectional doors with accepting bottom bar, as well as multiple compatible mounting channels. This slide-in style edge features a double-T mounting design, which provides superior stability for sectional overhead commercial doors and material handling system applications.

ME120 is ideal for a wide variety of applications, from motorized doors and gates to industrial safeguarding on manufacturing equipment. Applications include: along conveyor systems to detect operator reach in, below lifts to protect from pinch points, and on a wide variety of plant equipment where touch-sensitive detection is desired.

Tech Tip: The ME120 sensing edge paired with the ME120-C5 mounting channel creates a “sweep edge� that safeguards the entrapment zone on driveways and curbs along the path of travel below a swinging gate, as defined by UL 325 and ASTM F2200.

ME120 is ideal for a wide variety of applications, from motorized doors and gates to industrial safeguarding on manufacturing equipment. Applications include: along conveyor systems to detect operator reach in, below lifts to protect from pinch points, and on a wide variety of plant equipment where touch-sensitive detection is desired.

Tech Tip: The ME120 sensing edge paired with the ME120-C5 mounting channel creates a “sweep edge� that safeguards the entrapment zone on driveways and curbs along the path of travel below a swinging gate, as defined by UL 325 and ASTM F2200.

Rubber bumper designed to fit the end of a 2-inch square gate post. This product does NOT have sensing capabilities.

The MC22 sensing edge is custom manufactured to your exact specifications for length and outlet location. When touched lightly or at an angle, MC22 will send an immediate electrical signal to operator controls to stop, and/or reverse operations. Made with a vinyl wrapping and an extruded T, it is designed to slide into applicable door’s bottom retainer. The exterior of the MC22 is highly flexible and can conform to irregularities in the floor.

The small profile of the MG110 electric sensing edge is specially designed to protect draw-in posts, pockets, and pivot points in gate installations. When touched lightly, MG110 will send an immediate electrical signal to operator controls to stop and/or reverse gate operation. The MG110 kit includes: (1) MG110 sensing edge, (1) ME110-C mounting channel, (2) molded nylon end caps, and (2) stainless steel self-drilling mounting screws.

ME110 is a streamlined sensing edge designed for applications where performance and appearance are key factors. When touched lightly, or at an angle, ME110 sends an immediate signal to stop and/or reverse operation. This slide-in style edge has multiple mounting channel options, allowing for easy installation with any style counter shutter or grille.

ME110 is a streamlined sensing edge designed for applications where performance and appearance are key factors. When touched lightly, or at an angle, ME110 sends an immediate signal to stop and/or reverse operation. This slide-in style edge has multiple mounting channel options, allowing for easy installation with any style counter shutter or grille.

The small profile of the MG110 electric sensing edge is specially designed to protect draw-in posts, pockets, and pivot points in gate installations. When touched lightly, MG110 will send an immediate electrical signal to operator controls to stop and/or reverse gate operation. The MG110 kit includes: (1) MG110 sensing edge, (1) ME110-C mounting channel, (2) molded nylon end caps, and (2) stainless steel self-drilling mounting screws.

The 1-1/2-inch tall ME111 sensing edge is an ideal solution for counter grilles and shutters in environments that have an uneven surface. The tall profile helps adhere the edge more uniformly to the uneven surface. When touch activated, ME111 sends an immediate signal to stop and or reverse operation. This slide-in style edge has multiple mounting channel options, allowing for easy installation with any style counter shutter or grille.

MU-style sensing edges mount directly to the bottom of a commercial sectional door or material handling system, no mounting channel required. The durable vinyl jacket that covers the internal switch forms two top tabs that were designed to wrap around a leading edge. The flexibility of the MU21 sensing edge allows it to conform to slight irregularities in the floor or other surface. When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation.

The 1-1/2-inch tall ME111 sensing edge is an ideal solution for counter grilles and shutters in environments that have an uneven surface. The tall profile helps adhere the edge more uniformly to the uneven surface. When touch activated, ME111 sends an immediate signal to stop and or reverse operation. This slide-in style edge has multiple mounting channel options, allowing for easy installation with any style counter shutter or grille.

The MT sensing edge product line consists of three standard models: MT21 (2 in W x 1 in H), MT22 (2 in W x 2 in H), and MT33 (3 in W x 3 in H). When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation. The MT edge switch is covered in a durable vinyl jacket. The top tab inserts between the double-L angle bottoms bars on a rolling door. These sensing edges are flexible and can conform to irregularities in the floor.

The MT sensing edge product line consists of three standard models: MT21 (2 in W x 1 in H), MT22 (2 in W x 2 in H), and MT33 (3 in W x 3 in H). When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation. The MT edge switch is covered in a durable vinyl jacket. The top tab inserts between the double-L angle bottoms bars on a rolling door. These sensing edges are flexible and can conform to irregularities in the floor.

Designed for application on two-inch thick doors, MU22 can be custom manufactured to accommodate the required length for commercial sectional doors and material handling systems. MU22 is engineered to send an immediate signal to stop and/or reverse operator controls when lightly touched. With the ability to mount vertically or horizontally and no mounting channel required, MU22 is a UL325 Recognized Component that is flexible, durable, and dependable. Available in various colors, lengths, and outlet locations to meet customer specifications.

The MT sensing edge product line consists of three standard models: MT21 (2 in W x 1 in H), MT22 (2 in W x 2 in H), and MT33 (3 in W x 3 in H). When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation. The MT edge switch is covered in a durable vinyl jacket. The top tab inserts between the double-L angle bottoms bars on a rolling door. These sensing edges are flexible and can conform to irregularities in the floor.

The MT sensing edge product line consists of three standard models: MT21 (2 in W x 1 in H), MT22 (2 in W x 2 in H), and MT33 (3 in W x 3 in H). When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation. The MT edge switch is covered in a durable vinyl jacket. The top tab inserts between the double-L angle bottoms bars on a rolling door. These sensing edges are flexible and can conform to irregularities in the floor.

MU-style sensing edges mount directly to the bottom of a commercial sectional door or material handling system, no mounting channel required. The durable vinyl jacket that covers the internal switch forms two top tabs that were designed to wrap around a leading edge. The flexibility of the MU21 sensing edge allows it to conform to slight irregularities in the floor or other surface. When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation.

MU-style sensing edges mount directly to the bottom of a commercial sectional door or material handling system, no mounting channel required. The durable vinyl jacket that covers the internal switch forms two top tabs that were designed to wrap around a leading edge. The flexibility of the MU21 sensing edge allows it to conform to slight irregularities in the floor or other surface. When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation.

ME112 is a pressure sensitive sensing edge that is manufactured to user specifications for length and outlet location. When touched activated, ME112 sends an immediate signal to operator controls to stop and/or reverse door operation. This sensing edge retrofits easily to 1-3/8-inch sectional doors with accepting bottom bar, as well as multiple compatible mounting channels. This slide-in style edge features a double-T mounting design, which provides superior stability for sectional overhead commercial doors and material handling system applications.

ME113 is a pressure sensitive sensing edge that is custom manufactured to user specifications for length and outlet location. When touched activated, ME113 sends an immediate signal to operator controls to stop and/or reverse door operation. This slide-in style edge features a double-T mounting design, which provides superior stability for sectional overhead commercial doors and material handling systems applications.

The MG123 sensing edge is the gate industry’s go-to 2 inch extruded edge. It is designed to fit a variety of applications and is custom manufactured to your specified length. When touched lightly, MG123 will send an immediate electrical signal to operator controls to stop and/or reverse gate operation. This slide-in style edge features a double-T mounting design which provides superior stability.

The ME116 sensing edge is specifically designed for 1-3/4 inch thick doors with a bottom retainer. This slide-in style edge features a double-T mounting design, which provides superior stability. ME116 is resistant to flame, water, and most common greases and oils. When touch activated, this pressure sensitive edge sends an immediate signal to controls to stop and/or reverse operation.

The MT sensing edge product line consists of three standard models: MT21 (2 in W x 1 in H), MT22 (2 in W x 2 in H), and MT33 (3 in W x 3 in H). When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation. The MT edge switch is covered in a durable vinyl jacket. The top tab inserts between the double-L angle bottoms bars on a rolling door. These sensing edges are flexible and can conform to irregularities in the floor.

Designed for application on two-inch thick doors, MU22 can be custom manufactured to accommodate the required length for commercial sectional doors and material handling systems. MU22 is engineered to send an immediate signal to stop and/or reverse operator controls when lightly touched. With the ability to mount vertically or horizontally and no mounting channel required, MU22 is a UL325 Recognized Component that is flexible, durable, and dependable. Available in various colors, lengths, and outlet locations to meet customer specifications.

Designed for application on two-inch thick doors, MU22 can be custom manufactured to accommodate the required length for commercial sectional doors and material handling systems. MU22 is engineered to send an immediate signal to stop and/or reverse operator controls when lightly touched. With the ability to mount vertically or horizontally and no mounting channel required, MU22 is a UL325 Recognized Component that is flexible, durable, and dependable. Available in various colors, lengths, and outlet locations to meet customer specifications.

MU-style sensing edges mount directly to the bottom of a commercial sectional door or material handling system, no mounting channel required. The durable vinyl jacket that covers the internal switch forms two top tabs that were designed to wrap around a leading edge. The flexibility of the MU21 sensing edge allows it to conform to slight irregularities in the floor or other surface. When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation.

The MT sensing edge product line consists of three standard models: MT21 (2 in W x 1 in H), MT22 (2 in W x 2 in H), and MT33 (3 in W x 3 in H). When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation. The MT edge switch is covered in a durable vinyl jacket. The top tab inserts between the double-L angle bottoms bars on a rolling door. These sensing edges are flexible and can conform to irregularities in the floor.

The MT sensing edge product line consists of three standard models: MT21 (2 in W x 1 in H), MT22 (2 in W x 2 in H), and MT33 (3 in W x 3 in H). When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation. The MT edge switch is covered in a durable vinyl jacket. The top tab inserts between the double-L angle bottoms bars on a rolling door. These sensing edges are flexible and can conform to irregularities in the floor.

The MT sensing edge product line consists of three standard models: MT21 (2 in W x 1 in H), MT22 (2 in W x 2 in H), and MT33 (3 in W x 3 in H). When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation. The MT edge switch is covered in a durable vinyl jacket. The top tab inserts between the double-L angle bottoms bars on a rolling door. These sensing edges are flexible and can conform to irregularities in the floor.

The ME123 sensing edge is the industry’s go-to, two inch extruded edge designed to fit a variety of door applications. It is custom manufactured to specified color and length. When touched lightly, ME123 will send an immediate electrical signal to operator controls to stop and/or reverse gate operation. This slide-in style edge features a double-T mounting design which provides superior stability.

The ME123 sensing edge is the industry’s go-to, two inch extruded edge designed to fit a variety of door applications. It is custom manufactured to specified color and length. When touched lightly, ME123 will send an immediate electrical signal to operator controls to stop and/or reverse gate operation. This slide-in style edge features a double-T mounting design which provides superior stability.

The MG123 sensing edge is the gate industry’s go-to 2 inch extruded edge. It is designed to fit a variety of applications and is custom manufactured to your specified length. When touched lightly, MG123 will send an immediate electrical signal to operator controls to stop and/or reverse gate operation. This slide-in style edge features a double-T mounting design which provides superior stability.

The ME116 sensing edge is specifically designed for 1-3/4 inch thick doors with a bottom retainer. This slide-in style edge features a double-T mounting design, which provides superior stability. ME116 is resistant to flame, water, and most common greases and oils. When touch activated, this pressure sensitive edge sends an immediate signal to controls to stop and/or reverse operation.

ME112 is a pressure sensitive sensing edge that is manufactured to user specifications for length and outlet location. When touched activated, ME112 sends an immediate signal to operator controls to stop and/or reverse door operation. This sensing edge retrofits easily to 1-3/8-inch sectional doors with accepting bottom bar, as well as multiple compatible mounting channels. This slide-in style edge features a double-T mounting design, which provides superior stability for sectional overhead commercial doors and material handling system applications.

ME113 is a pressure sensitive sensing edge that is custom manufactured to user specifications for length and outlet location. When touched activated, ME113 sends an immediate signal to operator controls to stop and/or reverse door operation. This slide-in style edge features a double-T mounting design, which provides superior stability for sectional overhead commercial doors and material handling systems applications.

Designed for application on two-inch thick doors, MU22 can be custom manufactured to accommodate the required length for commercial sectional doors and material handling systems. MU22 is engineered to send an immediate signal to stop and/or reverse operator controls when lightly touched. With the ability to mount vertically or horizontally and no mounting channel required, MU22 is a UL325 Recognized Component that is flexible, durable, and dependable. Available in various colors, lengths, and outlet locations to meet customer specifications.

The MC110 sensing edge is designed for rolling counter shutter and grille applications, prioritizing both performance and aesthetics. When touched lightly, or at an angle, MC110 sends an immediate signal to stop and/or reverse operation. This slide-in style sensing edge integrates a unique guide cap design that efficiently blocks light along the ends of the sensing edge. Additionally, the design contributes to enhancing building efficiency by minimizing air gaps. It further acts as a barrier to pests in food service areas. MC110 contributes to an integrated appearance that seamlessly complements the overall look of a counter shutter or grille.

The MC271 sensing edge is custom manufactured to your exact specifications for length and outlet location. When touched lightly or at an angle, MC271 will send an immediate electrical signal to operator controls to stop, and/or reverse operations. Made with a vinyl wrapping and an extruded T, it is designed to slide into applicable door’s bottom retainer. The exterior of the MC271 is highly flexible and can conform to irregularities in the floor.

Miller Edge Warning: "Stand Clear When in Motion" labels, 6"x2", 100 pack.

The MC22 sensing edge is custom manufactured to your exact specifications for length and outlet location. When touched lightly or at an angle, MC22 will send an immediate electrical signal to operator controls to stop, and/or reverse operations. Made with a vinyl wrapping and an extruded T, it is designed to slide into applicable door’s bottom retainer. The exterior of the MC22 is highly flexible and can conform to irregularities in the floor.

ME120 is ideal for a wide variety of applications, from motorized doors and gates to industrial safeguarding on manufacturing equipment. Applications include: along conveyor systems to detect operator reach in, below lifts to protect from pinch points, and on a wide variety of plant equipment where touch-sensitive detection is desired.

Tech Tip: The ME120 sensing edge paired with the ME120-C5 mounting channel creates a “sweep edge� that safeguards the entrapment zone on driveways and curbs along the path of travel below a swinging gate, as defined by UL 325 and ASTM F2200.

The ME117 sensing edge has an added layer of PVC, creating a hollow pocket on the bottom of the edge. This hollow pocket conforms to irregularities in the surface which help prevent dust and debris from passing the threshold. ME117 is designed to fit doors from 1 to 2-inch thick. When touch activated, ME117 sends an immediate signal to controls to stop and/or reverse operation. A mounting channel is available for easy installation on machinery applications.

ME120 is ideal for a wide variety of applications, from motorized doors and gates to industrial safeguarding on manufacturing equipment. Applications include: along conveyor systems to detect operator reach in, below lifts to protect from pinch points, and on a wide variety of plant equipment where touch-sensitive detection is desired.

Tech Tip: The ME120 sensing edge paired with the ME120-C5 mounting channel creates a “sweep edge� that safeguards the entrapment zone on driveways and curbs along the path of travel below a swinging gate, as defined by UL 325 and ASTM F2200.

The MC22 sensing edge is custom manufactured to your exact specifications for length and outlet location. When touched lightly or at an angle, MC22 will send an immediate electrical signal to operator controls to stop, and/or reverse operations. Made with a vinyl wrapping and an extruded T, it is designed to slide into applicable door’s bottom retainer. The exterior of the MC22 is highly flexible and can conform to irregularities in the floor.

The MC22 sensing edge is custom manufactured to your exact specifications for length and outlet location. When touched lightly or at an angle, MC22 will send an immediate electrical signal to operator controls to stop, and/or reverse operations. Made with a vinyl wrapping and an extruded T, it is designed to slide into applicable door’s bottom retainer. The exterior of the MC22 is highly flexible and can conform to irregularities in the floor.

The MC22 sensing edge is custom manufactured to your exact specifications for length and outlet location. When touched lightly or at an angle, MC22 will send an immediate electrical signal to operator controls to stop, and/or reverse operations. Made with a vinyl wrapping and an extruded T, it is designed to slide into applicable door’s bottom retainer. The exterior of the MC22 is highly flexible and can conform to irregularities in the floor.

The ME117 sensing edge has an added layer of PVC, creating a hollow pocket on the bottom of the edge. This hollow pocket conforms to irregularities in the surface which help prevent dust and debris from passing the threshold. ME117 is designed to fit doors from 1 to 2-inch thick. When touch activated, ME117 sends an immediate signal to controls to stop and/or reverse operation. A mounting channel is available for easy installation on machinery applications.

The MGR20 and MGS20 sensing edges offer three-sided activation for an added measure of protection. They directly mount to a 2 inch post by wrapping around the leading edge of a gate; no mounting channel required. MGR20 is designed for round applications and MGS20 is designed for square applications. Both models are custom manufactured to user specifications for color, length, and outlet location.

The MT sensing edge product line consists of three standard models: MT21 (2 in W x 1 in H), MT22 (2 in W x 2 in H), and MT33 (3 in W x 3 in H). When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation. The MT edge switch is covered in a durable vinyl jacket. The top tab inserts between the double-L angle bottoms bars on a rolling door. These sensing edges are flexible and can conform to irregularities in the floor.

The MGR20 and MGS20 sensing edges offer three-sided activation for an added measure of protection. They directly mount to a 2 inch post by wrapping around the leading edge of a gate; no mounting channel required. MGR20 is designed for round applications and MGS20 is designed for square applications. Both models are custom manufactured to user specifications for color, length, and outlet location.

The MGR20 and MGS20 sensing edges offer three-sided activation for an added measure of protection. They directly mount to a 2 inch post by wrapping around the leading edge of a gate; no mounting channel required. MGR20 is designed for round applications and MGS20 is designed for square applications. Both models are custom manufactured to user specifications for color, length, and outlet location.

The MT sensing edge product line consists of three standard models: MT21 (2 in W x 1 in H), MT22 (2 in W x 2 in H), and MT33 (3 in W x 3 in H). When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation. The MT edge switch is covered in a durable vinyl jacket. The top tab inserts between the double-L angle bottoms bars on a rolling door. These sensing edges are flexible and can conform to irregularities in the floor.

MU-style sensing edges mount directly to the bottom of a commercial sectional door or material handling system, no mounting channel required. The durable vinyl jacket that covers the internal switch forms two top tabs that were designed to wrap around a leading edge. The flexibility of the MU21 sensing edge allows it to conform to slight irregularities in the floor or other surface. When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation.

Designed for application on two-inch thick doors, MU22 can be custom manufactured to accommodate the required length for commercial sectional doors and material handling systems. MU22 is engineered to send an immediate signal to stop and/or reverse operator controls when lightly touched. With the ability to mount vertically or horizontally and no mounting channel required, MU22 is a UL325 Recognized Component that is flexible, durable, and dependable. Available in various colors, lengths, and outlet locations to meet customer specifications.

The MT sensing edge product line consists of three standard models: MT21 (2 in W x 1 in H), MT22 (2 in W x 2 in H), and MT33 (3 in W x 3 in H). When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation. The MT edge switch is covered in a durable vinyl jacket. The top tab inserts between the double-L angle bottoms bars on a rolling door. These sensing edges are flexible and can conform to irregularities in the floor.

The MT sensing edge product line consists of three standard models: MT21 (2 in W x 1 in H), MT22 (2 in W x 2 in H), and MT33 (3 in W x 3 in H). When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation. The MT edge switch is covered in a durable vinyl jacket. The top tab inserts between the double-L angle bottoms bars on a rolling door. These sensing edges are flexible and can conform to irregularities in the floor.

MU-style sensing edges mount directly to the bottom of a commercial sectional door or material handling system, no mounting channel required. The durable vinyl jacket that covers the internal switch forms two top tabs that were designed to wrap around a leading edge. The flexibility of the MU21 sensing edge allows it to conform to slight irregularities in the floor or other surface. When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation.

Clima-Guard functions exactly like a pressure sensitive electric edge, but with an added layer of protection. The protective loop seal conforms to irregularities in the floor and helps prevent air infiltration and serves as a weather barrier. Clima-Guard is made up of an ME112 sensing edge paired with a PVC loop seal that comes with a double slot mounting channel.

Clima-Guard functions exactly like a pressure sensitive electric edge, but with an added layer of protection. The protective loop seal conforms to irregularities in the floor and helps prevent air infiltration and serves as a weather barrier. Clima-Guard is made up of an ME112 sensing edge paired with a PVC loop seal that comes with a double slot mounting channel.

Designed for application on two-inch thick doors, MU22 can be custom manufactured to accommodate the required length for commercial sectional doors and material handling systems. MU22 is engineered to send an immediate signal to stop and/or reverse operator controls when lightly touched. With the ability to mount vertically or horizontally and no mounting channel required, MU22 is a UL325 Recognized Component that is flexible, durable, and dependable. Available in various colors, lengths, and outlet locations to meet customer specifications.

The MT sensing edge product line consists of three standard models: MT21 (2 in W x 1 in H), MT22 (2 in W x 2 in H), and MT33 (3 in W x 3 in H). When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation. The MT edge switch is covered in a durable vinyl jacket. The top tab inserts between the double-L angle bottoms bars on a rolling door. These sensing edges are flexible and can conform to irregularities in the floor.

CPT210 is a UL 325 recognized sensing edge designed for on-site configuration and assembly. Upon contact with an obstruction, the edge signals operator controls to immediately stop and/or reverse motion. The compact profile of CPT210 makes it an ideal choice for narrow surfaces and pinch points. Easily cut down the CPT210 extrusion to the required length at the job site, ensuring a quick turnaround time. The advanced design of the CPT210 cap, cage, and plug provides a sealed assembly, eliminating the need for adhesive. This feature not only provides flexibility for field length adjustment but also allows users to choose the appropriate termination for monitoring compatibility with the operator. Experience the efficiency and adaptability of CPT210 for seamless integration into your safety systems.

The MT sensing edge product line consists of three standard models: MT21 (2 in W x 1 in H), MT22 (2 in W x 2 in H), and MT33 (3 in W x 3 in H). When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation. The MT edge switch is covered in a durable vinyl jacket. The top tab inserts between the double-L angle bottoms bars on a rolling door. These sensing edges are flexible and can conform to irregularities in the floor.

The MC22 sensing edge is custom manufactured to your exact specifications for length and outlet location. When touched lightly or at an angle, MC22 will send an immediate electrical signal to operator controls to stop, and/or reverse operations. Made with a vinyl wrapping and an extruded T, it is designed to slide into applicable door’s bottom retainer. The exterior of the MC22 is highly flexible and can conform to irregularities in the floor.

The MC22 sensing edge is custom manufactured to your exact specifications for length and outlet location. When touched lightly or at an angle, MC22 will send an immediate electrical signal to operator controls to stop, and/or reverse operations. Made with a vinyl wrapping and an extruded T, it is designed to slide into applicable door’s bottom retainer. The exterior of the MC22 is highly flexible and can conform to irregularities in the floor.

CPT215 is a UL 325 recognized sensing edge designed for on-site configuration and assembly. Upon contact with an obstruction, the edge signals operator controls to immediately stop and/or reverse motion. Easily cut the CPT215 extrusion to the required length at the job site, ensuring a quick turnaround with no lead time. The advanced design of the CPT215 cap, cage, and plug provides a sealed assembly, providing a no-glue solution. This feature not only provides flexibility for field length adjustment but also allows users to choose the appropriate termination for monitoring compatibility with the operator. Experience the efficiency and adaptability of CPT215 for seamless integration into your safety systems.

CPT215 is a UL 325 recognized sensing edge designed for on-site configuration and assembly. Upon contact with an obstruction, the edge signals operator controls to immediately stop and/or reverse motion. Easily cut the CPT215 extrusion to the required length at the job site, ensuring a quick turnaround with no lead time. The advanced design of the CPT215 cap, cage, and plug provides a sealed assembly, providing a no-glue solution. This feature not only provides flexibility for field length adjustment but also allows users to choose the appropriate termination for monitoring compatibility with the operator. Experience the efficiency and adaptability of CPT215 for seamless integration into your safety systems.

The MT sensing edge product line consists of three standard models: MT21 (2 in W x 1 in H), MT22 (2 in W x 2 in H), and MT33 (3 in W x 3 in H). When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation. The MT edge switch is covered in a durable vinyl jacket. The top tab inserts between the double-L angle bottoms bars on a rolling door. These sensing edges are flexible and can conform to irregularities in the floor.

The MT sensing edge product line consists of three standard models: MT21 (2 in W x 1 in H), MT22 (2 in W x 2 in H), and MT33 (3 in W x 3 in H). When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation. The MT edge switch is covered in a durable vinyl jacket. The top tab inserts between the double-L angle bottoms bars on a rolling door. These sensing edges are flexible and can conform to irregularities in the floor.

1.5V AA lithium battery.

CPT210 is a UL 325 recognized sensing edge designed for on-site configuration and assembly. Upon contact with an obstruction, the edge signals operator controls to immediately stop and/or reverse motion. The compact profile of CPT210 makes it an ideal choice for narrow surfaces and pinch points. Easily cut down the CPT210 extrusion to the required length at the job site, ensuring a quick turnaround time. The advanced design of the CPT210 cap, cage, and plug provides a sealed assembly, eliminating the need for adhesive. This feature not only provides flexibility for field length adjustment but also allows users to choose the appropriate termination for monitoring compatibility with the operator. Experience the efficiency and adaptability of CPT210 for seamless integration into your safety systems.

Extrusion Cutter; use for straight even cutting of flexible hose or extrusion

CPT215 is a UL 325 recognized sensing edge designed for on-site configuration and assembly. Upon contact with an obstruction, the edge signals operator controls to immediately stop and/or reverse motion. Easily cut the CPT215 extrusion to the required length at the job site, ensuring a quick turnaround with no lead time. The advanced design of the CPT215 cap, cage, and plug provides a sealed assembly, providing a no-glue solution. This feature not only provides flexibility for field length adjustment but also allows users to choose the appropriate termination for monitoring compatibility with the operator. Experience the efficiency and adaptability of CPT215 for seamless integration into your safety systems.

The MT sensing edge product line consists of three standard models: MT21 (2 in W x 1 in H), MT22 (2 in W x 2 in H), and MT33 (3 in W x 3 in H). When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation. The MT edge switch is covered in a durable vinyl jacket. The top tab inserts between the double-L angle bottoms bars on a rolling door. These sensing edges are flexible and can conform to irregularities in the floor.

3.6V AA lithium battery.

The MT sensing edge product line consists of three standard models: MT21 (2 in W x 1 in H), MT22 (2 in W x 2 in H), and MT33 (3 in W x 3 in H). When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation. The MT edge switch is covered in a durable vinyl jacket. The top tab inserts between the double-L angle bottoms bars on a rolling door. These sensing edges are flexible and can conform to irregularities in the floor.

The three-inch wide MU33 sensing edge was specially developed for aircraft hangar doors and material handling systems. MU33 is manufactured to your exact specifications for color, length, and outlet location. Install by wrapping the top tabs around the leading edge of a three-inch thick door or surface to minimize risk of injury and damage to aircraft and other equipment. The flexible jacket that covers the internal edge switch allows MU33 to conform to slight irregularities in the floor or other surfaces. When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation.

CPT215 is a UL 325 recognized sensing edge designed for on-site configuration and assembly. Upon contact with an obstruction, the edge signals operator controls to immediately stop and/or reverse motion. Easily cut the CPT215 extrusion to the required length at the job site, ensuring a quick turnaround with no lead time. The advanced design of the CPT215 cap, cage, and plug provides a sealed assembly, providing a no-glue solution. This feature not only provides flexibility for field length adjustment but also allows users to choose the appropriate termination for monitoring compatibility with the operator. Experience the efficiency and adaptability of CPT215 for seamless integration into your safety systems.

The three-inch wide MU33 sensing edge was specially developed for aircraft hangar doors and material handling systems. MU33 is manufactured to your exact specifications for color, length, and outlet location. Install by wrapping the top tabs around the leading edge of a three-inch thick door or surface to minimize risk of injury and damage to aircraft and other equipment. The flexible jacket that covers the internal edge switch allows MU33 to conform to slight irregularities in the floor or other surfaces. When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation.

The three-inch wide MU33 sensing edge was specially developed for aircraft hangar doors and material handling systems. MU33 is manufactured to your exact specifications for color, length, and outlet location. Install by wrapping the top tabs around the leading edge of a three-inch thick door or surface to minimize risk of injury and damage to aircraft and other equipment. The flexible jacket that covers the internal edge switch allows MU33 to conform to slight irregularities in the floor or other surfaces. When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation.

CPT210 is a UL 325 recognized sensing edge designed for on-site configuration and assembly. Upon contact with an obstruction, the edge signals operator controls to immediately stop and/or reverse motion. The compact profile of CPT210 makes it an ideal choice for narrow surfaces and pinch points. Easily cut down the CPT210 extrusion to the required length at the job site, ensuring a quick turnaround time. The advanced design of the CPT210 cap, cage, and plug provides a sealed assembly, eliminating the need for adhesive. This feature not only provides flexibility for field length adjustment but also allows users to choose the appropriate termination for monitoring compatibility with the operator. Experience the efficiency and adaptability of CPT210 for seamless integration into your safety systems.

The three-inch wide MU33 sensing edge was specially developed for aircraft hangar doors and material handling systems. MU33 is manufactured to your exact specifications for color, length, and outlet location. Install by wrapping the top tabs around the leading edge of a three-inch thick door or surface to minimize risk of injury and damage to aircraft and other equipment. The flexible jacket that covers the internal edge switch allows MU33 to conform to slight irregularities in the floor or other surfaces. When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation.

The three-inch wide MU33 sensing edge was specially developed for aircraft hangar doors and material handling systems. MU33 is manufactured to your exact specifications for color, length, and outlet location. Install by wrapping the top tabs around the leading edge of a three-inch thick door or surface to minimize risk of injury and damage to aircraft and other equipment. The flexible jacket that covers the internal edge switch allows MU33 to conform to slight irregularities in the floor or other surfaces. When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation.

The three-inch wide MU33 sensing edge was specially developed for aircraft hangar doors and material handling systems. MU33 is manufactured to your exact specifications for color, length, and outlet location. Install by wrapping the top tabs around the leading edge of a three-inch thick door or surface to minimize risk of injury and damage to aircraft and other equipment. The flexible jacket that covers the internal edge switch allows MU33 to conform to slight irregularities in the floor or other surfaces. When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation.

The small profile of the MG110 electric sensing edge is specially designed to protect draw-in posts, pockets, and pivot points in gate installations. When touched lightly, MG110 will send an immediate electrical signal to operator controls to stop and/or reverse gate operation. The MG110 kit includes: (1) MG110 sensing edge, (1) ME110-C mounting channel, (2) molded nylon end caps, and (2) stainless steel self-drilling mounting screws.

The small profile of the MG110 electric sensing edge is specially designed to protect draw-in posts, pockets, and pivot points in gate installations. When touched lightly, MG110 will send an immediate electrical signal to operator controls to stop and/or reverse gate operation. The MG110 kit includes: (1) MG110 sensing edge, (1) ME110-C mounting channel, (2) molded nylon end caps, and (2) stainless steel self-drilling mounting screws.

The small profile of the MG110 electric sensing edge is specially designed to protect draw-in posts, pockets, and pivot points in gate installations. When touched lightly, MG110 will send an immediate electrical signal to operator controls to stop and/or reverse gate operation. The MG110 kit includes: (1) MG110 sensing edge, (1) ME110-C mounting channel, (2) molded nylon end caps, and (2) stainless steel self-drilling mounting screws.

For commercial overhead doors with coil cords or retracting reels. Includes one straight connector and one 90-degree connector, two wire nuts, 11 knock outs. Weatherproof housing. 3-3/4"H x 1-1/2"W x 1-1/2"D

Insulated for signal reception range increase

The small profile of the MG110 electric sensing edge is specially designed to protect draw-in posts, pockets, and pivot points in gate installations. When touched lightly, MG110 will send an immediate electrical signal to operator controls to stop and/or reverse gate operation. The MG110 kit includes: (1) MG110 sensing edge, (1) ME110-C mounting channel, (2) molded nylon end caps, and (2) stainless steel self-drilling mounting screws.

The small profile of the MG110 electric sensing edge is specially designed to protect draw-in posts, pockets, and pivot points in gate installations. When touched lightly, MG110 will send an immediate electrical signal to operator controls to stop and/or reverse gate operation. The MG110 kit includes: (1) MG110 sensing edge, (1) ME110-C mounting channel, (2) molded nylon end caps, and (2) stainless steel self-drilling mounting screws.

Bottom Bulb Seal: for use on rolling steel doors; 100 ft spool.

Discontinued. For competitive bid situations, CPT204 offers dealers entry-level pricing combined with the rugged reliability of Miller Edge sensing edges. CPT204 is designed to be configured at the job site and can be purchased with all required components and hardware, making the final assembly fast and easy for installers. Available in bulk or in individual kits, CPT204 is easy to order and convenient to inventory on your service trucks.

CPT210 is a UL 325 recognized sensing edge designed for on-site configuration and assembly. Upon contact with an obstruction, the edge signals operator controls to immediately stop and/or reverse motion. The compact profile of CPT210 makes it an ideal choice for narrow surfaces and pinch points. Easily cut down the CPT210 extrusion to the required length at the job site, ensuring a quick turnaround time. The advanced design of the CPT210 cap, cage, and plug provides a sealed assembly, eliminating the need for adhesive. This feature not only provides flexibility for field length adjustment but also allows users to choose the appropriate termination for monitoring compatibility with the operator. Experience the efficiency and adaptability of CPT210 for seamless integration into your safety systems.

The small profile of the MG110 electric sensing edge is specially designed to protect draw-in posts, pockets, and pivot points in gate installations. When touched lightly, MG110 will send an immediate electrical signal to operator controls to stop and/or reverse gate operation. The MG110 kit includes: (1) MG110 sensing edge, (1) ME110-C mounting channel, (2) molded nylon end caps, and (2) stainless steel self-drilling mounting screws.

For commercial overhead doors with coil cords or retracting reels. Includes one straight connector and one 90-degree connector, two wire nuts, 11 knock outs. 3-3/4"H x 1-1/2"W x 1-1/2"D

The small profile of the MG110 electric sensing edge is specially designed to protect draw-in posts, pockets, and pivot points in gate installations. When touched lightly, MG110 will send an immediate electrical signal to operator controls to stop and/or reverse gate operation. The MG110 kit includes: (1) MG110 sensing edge, (1) ME110-C mounting channel, (2) molded nylon end caps, and (2) stainless steel self-drilling mounting screws.

The small profile of the MG110 electric sensing edge is specially designed to protect draw-in posts, pockets, and pivot points in gate installations. When touched lightly, MG110 will send an immediate electrical signal to operator controls to stop and/or reverse gate operation. The MG110 kit includes: (1) MG110 sensing edge, (1) ME110-C mounting channel, (2) molded nylon end caps, and (2) stainless steel self-drilling mounting screws.

CPT215 is a UL 325 recognized sensing edge designed for on-site configuration and assembly. Upon contact with an obstruction, the edge signals operator controls to immediately stop and/or reverse motion. Easily cut the CPT215 extrusion to the required length at the job site, ensuring a quick turnaround with no lead time. The advanced design of the CPT215 cap, cage, and plug provides a sealed assembly, providing a no-glue solution. This feature not only provides flexibility for field length adjustment but also allows users to choose the appropriate termination for monitoring compatibility with the operator. Experience the efficiency and adaptability of CPT215 for seamless integration into your safety systems.

ME120 is ideal for a wide variety of applications, from motorized doors and gates to industrial safeguarding on manufacturing equipment. Applications include: along conveyor systems to detect operator reach in, below lifts to protect from pinch points, and on a wide variety of plant equipment where touch-sensitive detection is desired.

Tech Tip: The ME120 sensing edge paired with the ME120-C5 mounting channel creates a “sweep edge� that safeguards the entrapment zone on driveways and curbs along the path of travel below a swinging gate, as defined by UL 325 and ASTM F2200.

ME120 is ideal for a wide variety of applications, from motorized doors and gates to industrial safeguarding on manufacturing equipment. Applications include: along conveyor systems to detect operator reach in, below lifts to protect from pinch points, and on a wide variety of plant equipment where touch-sensitive detection is desired.

Tech Tip: The ME120 sensing edge paired with the ME120-C5 mounting channel creates a “sweep edge� that safeguards the entrapment zone on driveways and curbs along the path of travel below a swinging gate, as defined by UL 325 and ASTM F2200.

The MGR20 and MGS20 sensing edges offer three-sided activation for an added measure of protection. They directly mount to a 2 inch post by wrapping around the leading edge of a gate; no mounting channel required. MGR20 is designed for round applications and MGS20 is designed for square applications. Both models are custom manufactured to user specifications for color, length, and outlet location.

The MGR20 and MGS20 sensing edges offer three-sided activation for an added measure of protection. They directly mount to a 2 inch post by wrapping around the leading edge of a gate; no mounting channel required. MGR20 is designed for round applications and MGS20 is designed for square applications. Both models are custom manufactured to user specifications for color, length, and outlet location.

The MGR20 and MGS20 sensing edges offer three-sided activation for an added measure of protection. They directly mount to a 2 inch post by wrapping around the leading edge of a gate; no mounting channel required. MGR20 is designed for round applications and MGS20 is designed for square applications. Both models are custom manufactured to user specifications for color, length, and outlet location.

The MGR20 and MGS20 sensing edges offer three-sided activation for an added measure of protection. They directly mount to a 2 inch post by wrapping around the leading edge of a gate; no mounting channel required. MGR20 is designed for round applications and MGS20 is designed for square applications. Both models are custom manufactured to user specifications for color, length, and outlet location.

ME120 is ideal for a wide variety of applications, from motorized doors and gates to industrial safeguarding on manufacturing equipment. Applications include: along conveyor systems to detect operator reach in, below lifts to protect from pinch points, and on a wide variety of plant equipment where touch-sensitive detection is desired.

Tech Tip: The ME120 sensing edge paired with the ME120-C5 mounting channel creates a “sweep edge� that safeguards the entrapment zone on driveways and curbs along the path of travel below a swinging gate, as defined by UL 325 and ASTM F2200.

ME120 is ideal for a wide variety of applications, from motorized doors and gates to industrial safeguarding on manufacturing equipment. Applications include: along conveyor systems to detect operator reach in, below lifts to protect from pinch points, and on a wide variety of plant equipment where touch-sensitive detection is desired.

Tech Tip: The ME120 sensing edge paired with the ME120-C5 mounting channel creates a “sweep edge� that safeguards the entrapment zone on driveways and curbs along the path of travel below a swinging gate, as defined by UL 325 and ASTM F2200.

The MGR20 and MGS20 sensing edges offer three-sided activation for an added measure of protection. They directly mount to a 2 inch post by wrapping around the leading edge of a gate; no mounting channel required. MGR20 is designed for round applications and MGS20 is designed for square applications. Both models are custom manufactured to user specifications for color, length, and outlet location.

The MGR20 and MGS20 sensing edges offer three-sided activation for an added measure of protection. They directly mount to a 2 inch post by wrapping around the leading edge of a gate; no mounting channel required. MGR20 is designed for round applications and MGS20 is designed for square applications. Both models are custom manufactured to user specifications for color, length, and outlet location.

The MGR20 and MGS20 sensing edges offer three-sided activation for an added measure of protection. They directly mount to a 2 inch post by wrapping around the leading edge of a gate; no mounting channel required. MGR20 is designed for round applications and MGS20 is designed for square applications. Both models are custom manufactured to user specifications for color, length, and outlet location.

The MGR20 and MGS20 sensing edges offer three-sided activation for an added measure of protection. They directly mount to a 2 inch post by wrapping around the leading edge of a gate; no mounting channel required. MGR20 is designed for round applications and MGS20 is designed for square applications. Both models are custom manufactured to user specifications for color, length, and outlet location.

The Photo Eye Conduit Enclosure Kit (PE-CON-K10) pairs seamlessly with TruGuard™ and OptiGuard™ photo optic systems by Miller Edge. The integrated 3�4� type-C conduit body provides a protective pathway for wires in installations using conduit while ensuring a clear connection to operator controls. This accessory features a hood designed to provide added shielding to the photo eye from sunlight, weather, dust, and debris. With a swivel bracket for easy alignment, the Photo Eye Conduit Enclosure Kit ensures optimal positioning of an accompanying photo eye or reflector..

Discontinued. For competitive bid situations, CPT204 offers dealers entry-level pricing combined with the rugged reliability of Miller Edge sensing edges. CPT204 is designed to be configured at the job site and can be purchased with all required components and hardware, making the final assembly fast and easy for installers. Available in bulk or in individual kits, CPT204 is easy to order and convenient to inventory on your service trucks.

Discontinued. For competitive bid situations, CPT204 offers dealers entry-level pricing combined with the rugged reliability of Miller Edge sensing edges. CPT204 is designed to be configured at the job site and can be purchased with all required components and hardware, making the final assembly fast and easy for installers. Available in bulk or in individual kits, CPT204 is easy to order and convenient to inventory on your service trucks.

Flexible wired connection between a sensing edge and its controller. As the door moves, the coil cord is able to extend and retract along with it.

ME120 is ideal for a wide variety of applications, from motorized doors and gates to industrial safeguarding on manufacturing equipment. Applications include: along conveyor systems to detect operator reach in, below lifts to protect from pinch points, and on a wide variety of plant equipment where touch-sensitive detection is desired.

Tech Tip: The ME120 sensing edge paired with the ME120-C5 mounting channel creates a “sweep edge� that safeguards the entrapment zone on driveways and curbs along the path of travel below a swinging gate, as defined by UL 325 and ASTM F2200.

ME120 is ideal for a wide variety of applications, from motorized doors and gates to industrial safeguarding on manufacturing equipment. Applications include: along conveyor systems to detect operator reach in, below lifts to protect from pinch points, and on a wide variety of plant equipment where touch-sensitive detection is desired.

Tech Tip: The ME120 sensing edge paired with the ME120-C5 mounting channel creates a “sweep edge� that safeguards the entrapment zone on driveways and curbs along the path of travel below a swinging gate, as defined by UL 325 and ASTM F2200.

ME120 is ideal for a wide variety of applications, from motorized doors and gates to industrial safeguarding on manufacturing equipment. Applications include: along conveyor systems to detect operator reach in, below lifts to protect from pinch points, and on a wide variety of plant equipment where touch-sensitive detection is desired.

Tech Tip: The ME120 sensing edge paired with the ME120-C5 mounting channel creates a “sweep edge� that safeguards the entrapment zone on driveways and curbs along the path of travel below a swinging gate, as defined by UL 325 and ASTM F2200.

The MGR20 and MGS20 sensing edges offer three-sided activation for an added measure of protection. They directly mount to a 2 inch post by wrapping around the leading edge of a gate; no mounting channel required. MGR20 is designed for round applications and MGS20 is designed for square applications. Both models are custom manufactured to user specifications for color, length, and outlet location.

The MGR20 and MGS20 sensing edges offer three-sided activation for an added measure of protection. They directly mount to a 2 inch post by wrapping around the leading edge of a gate; no mounting channel required. MGR20 is designed for round applications and MGS20 is designed for square applications. Both models are custom manufactured to user specifications for color, length, and outlet location.

ME120 is ideal for a wide variety of applications, from motorized doors and gates to industrial safeguarding on manufacturing equipment. Applications include: along conveyor systems to detect operator reach in, below lifts to protect from pinch points, and on a wide variety of plant equipment where touch-sensitive detection is desired.

Tech Tip: The ME120 sensing edge paired with the ME120-C5 mounting channel creates a “sweep edge� that safeguards the entrapment zone on driveways and curbs along the path of travel below a swinging gate, as defined by UL 325 and ASTM F2200.

The MGR20 and MGS20 sensing edges offer three-sided activation for an added measure of protection. They directly mount to a 2 inch post by wrapping around the leading edge of a gate; no mounting channel required. MGR20 is designed for round applications and MGS20 is designed for square applications. Both models are custom manufactured to user specifications for color, length, and outlet location.

The MGR20 and MGS20 sensing edges offer three-sided activation for an added measure of protection. They directly mount to a 2 inch post by wrapping around the leading edge of a gate; no mounting channel required. MGR20 is designed for round applications and MGS20 is designed for square applications. Both models are custom manufactured to user specifications for color, length, and outlet location.

ME120 is ideal for a wide variety of applications, from motorized doors and gates to industrial safeguarding on manufacturing equipment. Applications include: along conveyor systems to detect operator reach in, below lifts to protect from pinch points, and on a wide variety of plant equipment where touch-sensitive detection is desired.

Tech Tip: The ME120 sensing edge paired with the ME120-C5 mounting channel creates a “sweep edge� that safeguards the entrapment zone on driveways and curbs along the path of travel below a swinging gate, as defined by UL 325 and ASTM F2200.

ME120 is ideal for a wide variety of applications, from motorized doors and gates to industrial safeguarding on manufacturing equipment. Applications include: along conveyor systems to detect operator reach in, below lifts to protect from pinch points, and on a wide variety of plant equipment where touch-sensitive detection is desired.

Tech Tip: The ME120 sensing edge paired with the ME120-C5 mounting channel creates a “sweep edge� that safeguards the entrapment zone on driveways and curbs along the path of travel below a swinging gate, as defined by UL 325 and ASTM F2200.

The MGR20 and MGS20 sensing edges offer three-sided activation for an added measure of protection. They directly mount to a 2 inch post by wrapping around the leading edge of a gate; no mounting channel required. MGR20 is designed for round applications and MGS20 is designed for square applications. Both models are custom manufactured to user specifications for color, length, and outlet location.

The MGR20 and MGS20 sensing edges offer three-sided activation for an added measure of protection. They directly mount to a 2 inch post by wrapping around the leading edge of a gate; no mounting channel required. MGR20 is designed for round applications and MGS20 is designed for square applications. Both models are custom manufactured to user specifications for color, length, and outlet location.

MWave is a fully customizable, hands-free radar motion sensor equipped with dual relays. The intelligent dual relay design provides detection capabilities that differentiate between approaching versus cross-traffic, as well as pedestrian versus vehicular traffic. Ideal for fast-paced environments, MWave comes pre-configured for a wide-range of applications. When paired with the optional Remote Control, MWave can be configured from the ground, making custom programming fast and easy.

The MGR20 and MGS20 sensing edges offer three-sided activation for an added measure of protection. They directly mount to a 2 inch post by wrapping around the leading edge of a gate; no mounting channel required. MGR20 is designed for round applications and MGS20 is designed for square applications. Both models are custom manufactured to user specifications for color, length, and outlet location.

The MGR20 and MGS20 sensing edges offer three-sided activation for an added measure of protection. They directly mount to a 2 inch post by wrapping around the leading edge of a gate; no mounting channel required. MGR20 is designed for round applications and MGS20 is designed for square applications. Both models are custom manufactured to user specifications for color, length, and outlet location.

Bottom Bulb Seal: for use on rolling steel doors; black; 100 ft spool.

Flexible wired connection between a sensing edge and its controller. As the door moves, the coil cord is able to extend and retract along with it.

Flexible wired connection between a sensing edge and its controller. As the door moves, the coil cord is able to extend and retract along with it.

The Miller Edge Signature Module is designed for use with UL 325 compliant commercial door operators. Both models are engineered to emulate a monitored pulsed sensing edge output required by some commercial door operators. Signature Modules are equipped with LED lights that indicate device power or fault conditions. They are easy to install and include a standard junction box.

The Miller Edge Signature Module is designed for use with UL 325 compliant commercial door operators. Both models are engineered to emulate a monitored pulsed sensing edge output required by some commercial door operators. Signature Modules are equipped with LED lights that indicate device power or fault conditions. They are easy to install and include a standard junction box.

Flexible wired connection between a sensing edge and its controller. As the door moves, the coil cord is able to extend and retract along with it.

Flexible wired connection between a sensing edge and its controller. As the door moves, the coil cord is able to extend and retract along with it.

Discontinued. For competitive bid situations, CPT204 offers dealers entry-level pricing combined with the rugged reliability of Miller Edge sensing edges. CPT204 is designed to be configured at the job site and can be purchased with all required components and hardware, making the final assembly fast and easy for installers. Available in bulk or in individual kits, CPT204 is easy to order and convenient to inventory on your service trucks.

For use with pre-UL325-2010 commercial door operators and CPT sensing edges. Enclosed in JB02P-W water resistant Junction Box.

Discontinued. For competitive bid situations, CPT204 offers dealers entry-level pricing combined with the rugged reliability of Miller Edge sensing edges. CPT204 is designed to be configured at the job site and can be purchased with all required components and hardware, making the final assembly fast and easy for installers. Available in bulk or in individual kits, CPT204 is easy to order and convenient to inventory on your service trucks.

2-wire door edge kit inlcudes (1) C182-12B, (2) JB-02.

Gate Edge Module (GEM) is designed to convert a hard-wired 10K resistive gate sensing edge to a monitored normally closed, 2-wire pulsed, or 4-wire pulsed sensing edge output required by some commercial gate operators. This allows for compatibility with nearly all UL 325 compliant gate operators manufactured after January 2016. GEM is equipped with LED lights that indicate device power or fault conditions. It is easy to install and features a compact size that fits inside the gate operator.

Gate Edge Module (GEM) is designed to convert a hard-wired 10K resistive gate sensing edge to a monitored normally closed, 2-wire pulsed, or 4-wire pulsed sensing edge output required by some commercial gate operators. This allows for compatibility with nearly all UL 325 compliant gate operators manufactured after January 2016. GEM is equipped with LED lights that indicate device power or fault conditions. It is easy to install and features a compact size that fits inside the gate operator.

Gate Edge Module (GEM) is designed to convert a hard-wired 10K resistive gate sensing edge to a monitored normally closed, 2-wire pulsed, or 4-wire pulsed sensing edge output required by some commercial gate operators. This allows for compatibility with nearly all UL 325 compliant gate operators manufactured after January 2016. GEM is equipped with LED lights that indicate device power or fault conditions. It is easy to install and features a compact size that fits inside the gate operator.

Flexible wired connection between a sensing edge and its controller. As the door moves, the coil cord is able to extend and retract along with it.

18 AWG cord in metal case; 2 conductor SJO cable; extended length 20 ft.

Flexible wired connection between a sensing edge and its controller. As the door moves, the coil cord is able to extend and retract along with it.

Discontinued. Miller Edge's CPT sensing edges are specially engineered to provide an efficient and cost-effective solution for touch sensitive signaling. CPT223 is the ideal service solution; available in convenient-to-stock 50-foot spools and easy to assemble in the field. Designed for 2 inch surfaces, this edge is compatible with several mounting channel options.

CPT210 is a UL 325 recognized sensing edge designed for on-site configuration and assembly. Upon contact with an obstruction, the edge signals operator controls to immediately stop and/or reverse motion. The compact profile of CPT210 makes it an ideal choice for narrow surfaces and pinch points. Easily cut down the CPT210 extrusion to the required length at the job site, ensuring a quick turnaround time. The advanced design of the CPT210 cap, cage, and plug provides a sealed assembly, eliminating the need for adhesive. This feature not only provides flexibility for field length adjustment but also allows users to choose the appropriate termination for monitoring compatibility with the operator. Experience the efficiency and adaptability of CPT210 for seamless integration into your safety systems.

4-wire door edge kit inlcudes (1) C182-12B, (2) JB-02.

18 AWG cord in metal case; 2 conductor SJO cable; extended length 25 ft.

Identify the termination and operation of an electric sensing edge with the Edge Tester by Miller Edge. With easy-read LEDs and alligator clips, technicians use MET-101 to determine the internal wiring configuration of a sensing edge for compatibility with the operator or to troubleshoot faults within a system. Unlike a multimeter, MET-101 can identify the proper function of a DC sensing edge. The Edge Tester is an ideal tool for all technicians installing or servicing motorized commercial doors or automated gates..

RBand is a monitored wireless transmitter/receiver system that eliminates the need to hard wire sensing edges. The RBand receiver can be paired with up to three transmitters/sensing edges per channel. The transmitter is built to endure rugged, outdoor environments. The RBand system features automatic channel switching and auto adjusting transmitter power regulation, helping boost signals and improve reliability, even in harsh RF environments. Models available for compatibility with most door and gate operators.

18 AWG cord in metal case; 3 conductor SO cable: extended length 30 ft.

Flexible wired connection between a sensing edge and its controller. As the door moves, the coil cord is able to extend and retract along with it.

The Miller Edge TruGuard monitored reflective photo optic system combines an emitter and receiver in the same housing. The reflector, equipped with hood for added sunlight immunity, returns the photo optic beam to the emitter/receiver unit. This system functions as a protective barrier guarding an entrapment or hazard zone. When an obstruction interrupts the beam, a signal is sent to motor controls to stop and/or reverse motion. A visible light beam eases alignment to the reflector making it easy to install.

Avoid visible cords and reels with this non-monitored wireless system. Designed to provide a wireless signal transmission from the sensing edge to motor controls, this three-channel edge system has on-board diagnostics for easy setup and troubleshooting. The transmitter comes standard with a NEMA 4 weather-proof enclosure and both the receiver and transmitter have a compact design that allow for easy troubleshooting via the transparent cases. The transmitter is available with an optional audible alarm that activates when the battery has 25% of its life remaining.

CPT210 is a UL 325 recognized sensing edge designed for on-site configuration and assembly. Upon contact with an obstruction, the edge signals operator controls to immediately stop and/or reverse motion. The compact profile of CPT210 makes it an ideal choice for narrow surfaces and pinch points. Easily cut down the CPT210 extrusion to the required length at the job site, ensuring a quick turnaround time. The advanced design of the CPT210 cap, cage, and plug provides a sealed assembly, eliminating the need for adhesive. This feature not only provides flexibility for field length adjustment but also allows users to choose the appropriate termination for monitoring compatibility with the operator. Experience the efficiency and adaptability of CPT210 for seamless integration into your safety systems.

The Miller Edge HDBracket BEA Heavy Duty Mounting Bracket is a must-have for the Falcon BEA sensor. This durable and reliable bracket is specifically designed to securely mount Miller Edge BEA edge sensors.

ParkDoc is a residential parking curb used on interior garage flooring to promote safe parking. Drivers can park their vehicles in the optimal position in their garage space with ease, avoiding the risk of damage to garage doors and vehicles as well as impact with items and walls in close quarters. When vehicle tires make contact with their ParkDoc, drivers know they have reached their prescribed parking spot. Note: This product is not intended for use with large commercial vehicles or forklifts. In addition to increased parking safety and precision, ParkDoc offers B2B customization options, creating marketing and brand awareness options for your business..

ParkDoc is a residential parking curb used on interior garage flooring to promote safe parking. Drivers can park their vehicles in the optimal position in their garage space with ease, avoiding the risk of damage to garage doors and vehicles as well as impact with items and walls in close quarters. When vehicle tires make contact with their ParkDoc, drivers know they have reached their prescribed parking spot. Note: This product is not intended for use with large commercial vehicles or forklifts. In addition to increased parking safety and precision, ParkDoc offers B2B customization options, creating marketing and brand awareness options for your business..

The Miller Edge OptiGuard monitored photo optic system provides thru-beam entrapment protection for door and gate operators. The emitter and receiver can be mounted vertically or horizontally to meet your safeguarding needs. When an obstruction interrupts the beam, a signal is sent to motor controls to stop and/or reverse motion. The durable mounting bracket/hoods offer additional protection against debris and serve as a weather and sun shield. Key components include an operating range of 100 feet and easy alignment through a visible beam of light.

CPT215 is a UL 325 recognized sensing edge designed for on-site configuration and assembly. Upon contact with an obstruction, the edge signals operator controls to immediately stop and/or reverse motion. Easily cut the CPT215 extrusion to the required length at the job site, ensuring a quick turnaround with no lead time. The advanced design of the CPT215 cap, cage, and plug provides a sealed assembly, providing a no-glue solution. This feature not only provides flexibility for field length adjustment but also allows users to choose the appropriate termination for monitoring compatibility with the operator. Experience the efficiency and adaptability of CPT215 for seamless integration into your safety systems.

CPT215 is a UL 325 recognized sensing edge designed for on-site configuration and assembly. Upon contact with an obstruction, the edge signals operator controls to immediately stop and/or reverse motion. Easily cut the CPT215 extrusion to the required length at the job site, ensuring a quick turnaround with no lead time. The advanced design of the CPT215 cap, cage, and plug provides a sealed assembly, providing a no-glue solution. This feature not only provides flexibility for field length adjustment but also allows users to choose the appropriate termination for monitoring compatibility with the operator. Experience the efficiency and adaptability of CPT215 for seamless integration into your safety systems.

Avoid visible cords and reels with this non-monitored wireless system. Designed to provide a wireless signal transmission from the sensing edge to motor controls, this three-channel edge system has on-board diagnostics for easy setup and troubleshooting. The transmitter comes standard with a NEMA 4 weather-proof enclosure and both the receiver and transmitter have a compact design that allow for easy troubleshooting via the transparent cases. The transmitter is available with an optional audible alarm that activates when the battery has 25% of its life remaining.

The Miller Edge TruGuard monitored reflective photo optic system combines an emitter and receiver in the same housing. The reflector, equipped with hood for added sunlight immunity, returns the photo optic beam to the emitter/receiver unit. This system functions as a protective barrier guarding an entrapment or hazard zone. When an obstruction interrupts the beam, a signal is sent to motor controls to stop and/or reverse motion. A visible light beam eases alignment to the reflector making it easy to install.

Avoid visible cords and reels with this non-monitored wireless system. Designed to provide a wireless signal transmission from the sensing edge to motor controls, this three-channel edge system has on-board diagnostics for easy setup and troubleshooting. The transmitter comes standard with a NEMA 4 weather-proof enclosure and both the receiver and transmitter have a compact design that allow for easy troubleshooting via the transparent cases. The transmitter is available with an optional audible alarm that activates when the battery has 25% of its life remaining.

The Miller Edge OptiGuard monitored photo optic system provides thru-beam entrapment protection for door and gate operators. The emitter and receiver can be mounted vertically or horizontally to meet your safeguarding needs. When an obstruction interrupts the beam, a signal is sent to motor controls to stop and/or reverse motion. The durable mounting bracket/hoods offer additional protection against debris and serve as a weather and sun shield. Key components include an operating range of 100 feet and easy alignment through a visible beam of light.

RBand is a monitored wireless transmitter/receiver system that eliminates the need to hard wire sensing edges. The RBand receiver can be paired with up to three transmitters/sensing edges per channel. The transmitter is built to endure rugged, outdoor environments. The RBand system features automatic channel switching and auto adjusting transmitter power regulation, helping boost signals and improve reliability, even in harsh RF environments. Models available for compatibility with most door and gate operators.

Avoid visible cords and reels with this non-monitored wireless system. Designed to provide a wireless signal transmission from the sensing edge to motor controls, this three-channel edge system has on-board diagnostics for easy setup and troubleshooting. The transmitter comes standard with a NEMA 4 weather-proof enclosure and both the receiver and transmitter have a compact design that allow for easy troubleshooting via the transparent cases. The transmitter is available with an optional audible alarm that activates when the battery has 25% of its life remaining.

MWave is a fully customizable, hands-free radar motion sensor equipped with dual relays. The intelligent dual relay design provides detection capabilities that differentiate between approaching versus cross-traffic, as well as pedestrian versus vehicular traffic. Ideal for fast-paced environments, MWave comes pre-configured for a wide-range of applications. When paired with the optional Remote Control, MWave can be configured from the ground, making custom programming fast and easy.

RBand is a monitored wireless transmitter/receiver system that eliminates the need to hard wire sensing edges. The RBand receiver can be paired with up to three transmitters/sensing edges per channel. The transmitter is built to endure rugged, outdoor environments. The RBand system features automatic channel switching and auto adjusting transmitter power regulation, helping boost signals and improve reliability, even in harsh RF environments. Models available for compatibility with most door and gate operators.

The E3K-R10K4 is a heavy-duty AC/DC retroreflective Photoelectric Sensor for long sensing distance. It has 950nm pulse modulated infrared LED light source and detects opaque object material..

Avoid visible cords and reels with this non-monitored wireless system. Designed to provide a wireless signal transmission from the sensing edge to motor controls, this three-channel edge system has on-board diagnostics for easy setup and troubleshooting. The transmitter comes standard with a NEMA 4 weather-proof enclosure and both the receiver and transmitter have a compact design that allow for easy troubleshooting via the transparent cases. The transmitter is available with an optional audible alarm that activates when the battery has 25% of its life remaining.

Discontinued. For competitive bid situations, CPT204 offers dealers entry-level pricing combined with the rugged reliability of Miller Edge sensing edges. CPT204 is designed to be configured at the job site and can be purchased with all required components and hardware, making the final assembly fast and easy for installers. Available in bulk or in individual kits, CPT204 is easy to order and convenient to inventory on your service trucks.

CPT210 is a UL 325 recognized sensing edge designed for on-site configuration and assembly. Upon contact with an obstruction, the edge signals operator controls to immediately stop and/or reverse motion. The compact profile of CPT210 makes it an ideal choice for narrow surfaces and pinch points. Easily cut down the CPT210 extrusion to the required length at the job site, ensuring a quick turnaround time. The advanced design of the CPT210 cap, cage, and plug provides a sealed assembly, eliminating the need for adhesive. This feature not only provides flexibility for field length adjustment but also allows users to choose the appropriate termination for monitoring compatibility with the operator. Experience the efficiency and adaptability of CPT210 for seamless integration into your safety systems.

The RT6 Safety Relay Controller is a single relay for all your safety applications. It both supervises your safety devices and the internal safety of your machinery. In addition, you can select the safety level required for each installation. All this is due to the RT6 having the most versatile input option arrangement available. The relay features both manual or automatic reset options and information outputs that follow the inputs and outputs of the relay. To protect the controller from incidental contact with the enclosed equipment; falling dirt, liquids and light splashing; dust, lint, fibers, and flyings; oil and coolant seepage, spraying, and splashing, consider the FSC-57, an RT6 within a NEMA 13 steel enclosure.

The RT6 Safety Relay Controller is a single relay for all your safety applications. It both supervises your safety devices and the internal safety of your machinery. In addition, you can select the safety level required for each installation. All this is due to the RT6 having the most versatile input option arrangement available. The relay features both manual or automatic reset options and information outputs that follow the inputs and outputs of the relay. To protect the controller from incidental contact with the enclosed equipment; falling dirt, liquids and light splashing; dust, lint, fibers, and flyings; oil and coolant seepage, spraying, and splashing, consider the FSC-57, an RT6 within a NEMA 13 steel enclosure.

The FSIS-35P-4 isolating switching amplifier initiates a safe, reliable response when a fault occurs or an obstruction is detected. Equipped with complete galvanic isolation and an intrinsically safe input circuit, the FSIS-35P-4 enables safe operation of electrical equipment in explosive atmospheres. Reverse polarity protection ensures equipment is not damaged if the power supply polarity is reversed by cutting off power to the controller.

For 2 or 4 wire safety devices. Detachable terminal blocks with 5 input configurations (single and dual channel modes hardwire selectable). Approved Category 4 safety device. 2 LED indicator lights (green for power / red for fault).

For 2 or 4 wire safety devices. Detachable terminal blocks with 5 input configurations (single and dual channel modes hardwire selectable). Approved Category 4 safety device. 2 LED indicator lights (green for power / red for fault).