You are here: Home > TARIFFS > Tariff Surcharge 27%
We found 90 results matching your criteria.
Sort By:
Page of 1
LiftMaster Flange Bearing, 1" LiftMaster K11-10197 Take-Up Bolt Shaft (3/8" x 4") LiftMaster Ball Bearing, 1"
This is a 1" Flange Ball Bearing Replacement Part. For use with Various LiftMaster Commercial Door Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
 		Replacement Take-Up Bolt Shaft (3/8" x 4").
For use with various LiftMaster® Logic 4.0/5.0 and MAXUM Series DC Trolley Commercial Operator Rail Installations only.
LiftMaster Clutch Disc LiftMaster Limit Nut LiftMaster K11-10130M Pivot Shaft Kit
This is a Clutch Disc Replacement Part. For use with various LiftMaster® Medium Duty Commercial Door Operator Models. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.

Part Specifications
  • Diameter: 3-15/16"
  • Center: 3/4"
  • Thickness: 0.125"
 		This is a Limit Nut Replacement Part. For use with various LiftMaster Commercial Door Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
 		Replacement Pivot Shaft Kit. For use with various LiftMaster® Logic 4.0/5.0 and and MAXUM Series DC Standard Duty and Industrial Duty Commercial Door Operators.
K07-50637 Q003 Chain Bolt LiftMaster Limit Switch, SPDT, 10A, 125/250VAC, K23-10041 LiftMaster Pulley, 2" OD, 5/8"B
This is a Chain Tensioner Bolt Kit. For use with various LiftMaster Residential and Commercial Slide Gate Operators. This replacement kit is most commonly used to tighten the attached chain on the sliding gate. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility. This is a Limit Switch Replacement Kit (SPDT, 10A, 125/250VAC). For use with various 1/2HP LiftMaster Commercial Door Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
 		K17-6014 is a replacement Pulley (2" OD, 5/8"B). For use with various LiftMaster Gate Operators and Commercial Door Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
LiftMaster Chain, #48x47 LiftMaster Washer, 3/4"x2-1/2" LiftMaster Sprocket, 48B14T, 1-1/2"B
This is a replacement Chain (#48x47). for use with various LiftMaster Commercial Door and Gate Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
 		K80-10883 is a replacement Washer (3/4"x2-1/2"). For use with various LiftMaster Commercial Door Operators; manufactured 2005-present. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
 		This is a replacement Sprocket (48B14T, 1-1/2"B). For use with various LiftMaster Industrial-Duty Hoist Commercial Door Operators; Manufactured 2005-Present. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
K75-50090 Idler Pulley, Q013 K10-10203 Curved Door Arm LiftMaster K10-10205 Header Bracket
This is an Idler Pulley Replacement Kit. For use with LiftMaster SL3000 Series Commercial Slide Gate Operators. Complete kit includes: idler sprocket pulley, bushing, hex screw, hex nut, and washers. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
Also known as: Q013 		This is a Curved Door Arm Replacement Kit. For use with various LiftMaster Commercial Door Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
Also known as: 1010203, 105004, 10-10203, 178B45 		Replacement Header Bracket Kit. For use with various LiftMaster® Logic 4.0/5.0 and MAXUM Series DC Trolley Commercial Operator Rail Installations only.
LiftMaster Sprocket, 48B32T, 1-1/2"B LiftMaster K75-10170 Trolley Slider Assembly Kit K75-10174 Front Idler Trolley Kit
This is a replacement Sprocket (48B32T, 1-1/2B). For use with various LiftMaster Jackshaft and Hoist Commercial Door Operators; Manufactured 2005-Present. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
 		Trolley Slider Assembly Kit. For use with various LiftMaster® Logic 4.0/5.0 and MAXUM Series DC Trolley Commercial Door Operators only. Front Idler Trolley Kit. For use with various LiftMaster® Logic 4.0/5.0 and MAXUM Series DC Trolley Commercial Door Operators only.
LiftMaster Interlock Switch, 15A, 125/250VAC LiftMaster V-Belt, 30-1/32" LiftMaster Transformer, 1PH, 120/240V-20VA, K21-14182
This is an Interlock Switch Replacement Kit (15A, 125/250VAC). For use with various 3/4HP LiftMaster Commercial Door Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
 		This is a replacement Cogged V-Belt (30-1/32") Kit. For use with various LiftMaster Commercial Door Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
 		This is a 1PH Dual-Voltage Transformer Kit (120/230V-20VA, 24VAC). For use with various LiftMaster 1PH Logic 5.0 Commercial Door Operators. Check the manual or parts diagram for specific part information before ordering to ensure compatibility.
LiftMaster Clutch Shaft, H LiftMaster K75-10259 Trolley Track Spacer Assembly Kit LiftMaster Cover for Current Sense Kit, H, J, L5, K75-36913
This is a Clutch Shaft Replacement Kit.  For use with LiftMaster Model H Series Industrial-Duty Hoist Commercial Door Operators; manufactured after 2005.  Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility. Trolley Track Spacer Assembly Kit. For use with various LiftMaster® Logic 4.0/5.0 and MAXUM Series DC Trolley Commercial Operator Rail Installations only. Complete kit includes: Trolley track spacer, Nylon chain guide pad, and installation hardware. This is a replacement Current Sense Cover (H, J, L5). Compatible with LiftMaster Models H and J Commercial Operators; equipped with Current Sense and Logic 5.0. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
LiftMaster Frame Plate Kit, Left Hand LiftMaster Frame Plate Kit, Right Hand LiftMaster RPM Sensor Kit
This is a replacement Frame Plate Kit (Left Hand). For use with various LiftMaster Hoist and Jackshaft Commercial Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
 		K75-19978-R is a Right Hand Frame Plate Replacement Kit. For use with various LiftMaster Hoist and Jackshaft Commercial Door Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
 		This is an RPM Sensor Replacement Kit. Compatible with LiftMaster Logic 3.0, 4.0, and 5.0 Commercial Door Operator Access Systems. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
K22-120 Brake Solenoid, 120V K22-240 Brake Solenoid, 240V K22-36900 Brake Solenoid, 3PH, L5
This is a Brake Solenoid (120V/60Hz) Replacement Kit. Compatible with various LiftMaster Logic 4.0 Commercial Door Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
Also known as: 22-120 		This is a Brake Solenoid (240V/60Hz) Replacement Kit. For use with various LiftMaster Logic 4.0 Commercial Door Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
Also known as: 22-240, 22-230 		This is a 3PH/L5 Brake Solenoid Replacement Kit (208V-230V/60Hz). For use with various LiftMaster Logic 5.0 Commercial Door Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
K22-36899 Brake Solenoid, 1PH, L5 K-001A5872 Control Board, 1HP LiftMaster K75-12870 Straight and Curved Door Arm Kit
This is a 1PH/L5 Brake Solenoid Replacement Kit. For use with various LiftMaster Logic 5.0 Commercial Door Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility. This is a replacement 1 HP Control Board. For use with various LiftMaster Swing and Slide Gate Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
Also known as: Q401A, Q401, K001A5872 		Replacement Straight and Curved Door Arm Kit.
For use with various LiftMaster® Logic 5.0 and MAXUM Series DC Trolley Commercial Door Operators only. Complete kit includes: Straight door arm, curved door arm, door bracket, emergency release rope, and replacement hardware.
K001D8396-1 1PH L5 Power Board, 115/230V LiftMaster K75-10406 Chain Assembly for APT Commercial Trolley Door Operators K29C-65AU2415 Q027 Motor Capacitor
This is a 1PH/L5 Power Board, 115V/230V Replacement Kit. For use with various LiftMaster 1 Phase Logic 5.0 Commercial Door Operators. This replacement power board features the K4 relay. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
Also known as: K001D8396, K001D8072-1 		Factory replacement drive chain kit. Compatible with LiftMaster APT Commercial Trolley Door Operators. This is a replacement Motor Capacitor (65uF, 240VAC, 50/60Hz). Compatible with LiftMaster CSW200U & SL3000U Models (post 2016), and various Commercial Swing and Slide Gate Operators; manufactured before 2016. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
K001D8397 3PH L5 Power Board, 230/460V K70-51060 Omni Surge Protector LiftMaster Internal Brake Solenoid, 575V with Cable
K001D8397 is a 3PH/L5 Power Board Replacement Kit. For use with various LiftMaster Logic 5.0 Three Phase Commercial Door Operators.
Also known as: K001D8073-1 		This is a Surge Protector Kit. For use with various LiftMaster Commercial Gate Operators. This surge protector kit is most commonly used with LiftMaster SL3000 & CSW200 Models. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.

Also known as: Q410 		This is a replacement Internal Brake Solenoid with Cable (575V). For use with LiftMaster Industrial-Duty Hoist Commercial Operators; manufactured after 2005. Check the manual or the replacement parts diagram for specific part information before ordering to ensure compatibility.
LiftMaster Arm Kit, H K1D8080-1CC Expansion Board K75-50097 Limit Switch Kit, Q024
This is an Arm Kit, H. Compatible with LiftMaster Models H and HJ Commercial Door Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.

 		This is a replacement Expansion Board (LA500DC, CSW24VDC, CSL24VDC). For use with various LiftMaster Swing Gate and Slide Gate Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility. This is a Limit Switch Assembly Replacement Kit. Compatible with LiftMaster SL3000 & SL3000ULE Series Commercial Slide Gate Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
Also known as: Q024
K001A6837 Logic Board, L4 LiftMaster Artisan 438 - Second Timer (Timer to close) K001A5566 GL Control Board
This is an L4 Logic Board Replacement Kit. For use with various LiftMaster Logic 4.0 Commercial Door Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
Also known as: 012381356195, K1A6837 		The model 438 Time Capsule is an all Solid State timer providing Delay on Make control to any 1 Ampere AC or DC load, such as a relay, solenoid or lamp. Simply connect the timer in series with the load, polarity need not be observed. When power is applied, the 438A/F remains in the "off" state. When the preset time period has elapsed, the 438A/F switches "on" allowing the load to energize. The load remains energized as long as power is applied. This replacement logic board is compatible with the following models: SL585, SL575, SL595
Also known as: 1A5566
K20-9012B-1 Motor, 12VDC K1D8387-1CC Expansion Board, UL325 K1D6686CC Expansion Board
This is a 12V DC Motor Replacement Kit. For use with various LiftMaster Slide and Swing Gate Commercial Door Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
Also known as: K20-9012B, Q123 		K1D8387-1CC is a UL325 Expansion Board. For use with various LiftMaster Commercial Swing and Slide Gate Operators; manufactured after 2016. This board is backwards compatible for older second generation units, but will require UL325 Entrapment Protection System and Photoelectric Sensors or Edge Sensors. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility. This is a replacement CSL24V, CSL24V, CSW24V, and CSW24V, Expansion Board. For use with various LiftMaster Slide and Swing Gate Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
LiftMaster Hand Chain Shaft Kit, GH LiftMaster Output Shaft Kit, H, J K76-37253 Motor, 1/8HP, 12VDC
This is a replacement Hand Chain Shaft Kit (GH). For use with various LiftMaster Commercial Door Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
 		This is a replacement Output Shaft Kit (H,J). For use with various LiftMaster Commercial Door Operator Models; manufactured after 2005. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
 		This is a 1/8HP Motor (12VDC) replacement kit. Compatible with LiftMaster RSL12U Slide Gate Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
LiftMaster Internal Brake Solenoid, 120V with Cable LiftMaster Internal Brake Solenoid, 240V with Cable LiftMaster K75-10387 Slider Assembly Kit for APT Openers
This is a replacement Internal Brake Solenoid with Cable (120V). For use with LiftMaster Industrial-Duty Hoist Commercial Operators; manufactured after 2005. Check the manual or the replacement parts diagram for specific part information before ordering to ensure compatibility.
 		This is a replacement Internal Brake Solenoid with Cable (240V). For use with LiftMaster Industrial-Duty Hoist Commercial Operators; manufactured after 2005. Check the manual or the replacement parts diagram for specific part information before ordering to ensure compatibility.
 		LiftMaster K75-10387 Slider Assembly Kit
K32-50225 Gear Reducer, 30:1, #40 LiftMaster Clutch Shaft Kit, H Post 2005 K1D8402-1CC Motor Drive Board, 1PH
This is a replacement Gear Reducer (30:1, #40). For use with various LiftMaster Swing and Slide Gate Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
Also known as: Q212 		This is a Clutch Shaft Replacement Kit. For use with various LiftMaster Model H Commercial Door Operators; manufactured after 2005. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
 		This is a replacement Motor Drive Board (1PH). Compatible with LiftMaster Models SL3000U and CSW200U Perimeter Access Systems Gate Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
K001A6426-1 Control Board K001A6426-2 Control Board K32-34701-5 Gear Reducer
This is a replacement LA412 Control Board. Compatible with LiftMaster Models LA412 and LA412-S Swing Gate Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
Also known as: K1A6426-1 		This replacement logic board is compatible with the following models: RSL12V, RSW12V
Also known as: K1A6426-2 		This is a Gear Reducer Replacement Kit. Compatible with LiftMaster Model RSL12U Slide Gate Perimeter Access Systems. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
K1D8059-1CC Main Control Board K20-1050B-2LP-H24 Motor, 1/2HP, 1PH, L5 K32-50112 Gear Reducer, 30:1
This replacement logic board is compatible with the following models: CSL24VDC, CSW24VDC, RSL12VDC, and RSW12VDC This is a replacement Motor Kit (1/2 HP, 1PH, L5). For use with various LiftMaster Logic 5.0 Commercial Door Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility. This is a Gear Reducer Replacement Kit (30:1, Q050). Compatible with LiftMaster Robo Swing and CSW200UL Swing Gate Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
Also known as: Q050
K32-50091 Gear Reducer, 30:1 K32-50127 Gear Reducer, 40:1 K1D8052-1CC Main Control Board
This is a replacement Gear Reducer (30:1). Compatible with LiftMaster Model SL3000 Slide Gate Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
Also known as: Q015 		This is a Gear Reducer, 40:1 Replacement Kit. For use with LiftMaster HCT Series Commercial Gate Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
Also known as: Q071 		This replacement logic board is compatible with the following models: LA500, LA400, & LA412
K20-1050B-1RL 1/2HP Motor, 1PH, 115V K001A6039 Control Board K79-60166 Control Board
This is a resilient base mount 1/2HP Motor Kit (115VAC). For use with various 1-Phase LiftMaster Gate Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
Also known as: Q018, Q018A, 20-1050B-1RL 		This is a Logic Control Replacement Board. Compatible with LiftMaster LA400 Swing Gate Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility. This Logic Control Replacement Board is for use with LiftMaster Mega Arm and Mega Arm Tower Gate Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
Also known as: MA-001, MA001, K79-60166B
K79-60142 Control Board K32-50251 Gear Reducer, 40:1 K32-37349 Gear Reducer and Brake
This is a Control Board (MSL/MSW). For use with LiftMaster Mega Swing and Mega Slide Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
Also known as: SW001, MS001, K79-60142B 		This is a Gear Reducer 40:1 Replacement Kit. Compatible with LiftMaster HCT Series Overhead Gate Operators manufactured after 1999. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility. This is a replacement Gear Reducer and Brake. Compatible with LiftMaster Model SL3000U Slide Gate Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
K1D6761-1CC Logic Board, AC K1D6597-1CC Control Board K32-34669-1 Gear Reducer, 10:1, #60
This replacement logic board is compatible with the following models: SL585U, SL585UL, SL595U, SL595UL, SL3000U, & SL3000UL This is a replacement Main Control Board (CSL24V, CSW24V). Compatible with LiftMaster Models CSL24V & CSW24V Gate Operators. The unit will feature a yellow learn button. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
This replacement logic board is compatible with the following models: CSL24V, CSW24V 		This is a Gear Reducer (10:1, #60) Replacement kit. For use with LiftMaster CSL Series Slide Gate Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
Also known as: K32-34669-3
K32-10540 Gear Reducer, 20:1, 1HP LiftMaster Gear Box Kit, #70, K-001A5867 Control Board
This is a replacement Gear Reducer (20:1, 1HP). For use with various LiftMaster Commercial Door and Gate Operators. Check the manual or parts diagram for specific part information before ordering to ensure compatibility.
Also known as: 32-10540, 32-55011, 32-5501-1, G3255011 		For use with various LiftMaster Commercial Swing Gate Operators manufactured after 1997. Compatible with the following models: CSW200, CSW200U, and CSW200UL.
Also known as: Q210. 		This replacement logic board is compatible with the following models: ROBOSWING & ROBOSLIDE
Also known as: Q206, Q206A, K-001A5867A
Q400 Control Board, OMNI OMNIUP Control Board, OMNI Upgrade Kit K32-34701-2 Gear Reducer
This replacement control board is compatible with the following models: SL3000, CSW200, HCT (Hercules) Series This is the OMNI Upgrade Control Board Replacement Kit. For use with LiftMaster Residential and Commercial Gate Operators. This complete kit includes: Q400E Omni Main Control Board and Q410 Omni Surge Suppressor. This replacement kit is the upgrade kit that converts the previous Omni Q019, CSW200, SL3000 or HCT to the OMNIUP control board. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility. This is a Gear Reducer Replacement Kit. Compatible with LiftMaster Model RSL12V Slide Gate Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
K20-1050C-1T 1/2HP Motor, 1PH, 115V C Mount DC2000 DC Battery Backup K32-11009 Gear Reducer 45:1, 1/3-1HP
This is a resilient base mount replacement 1/2HP Motor (115V, 60Hz, PH1). For use with 1-Phase LiftMaster model HCT Gate Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
Also known as: Q250 		This is a DC2000 Controller with battery backup. For use with various LiftMaster Commercial Swing & Slide Gate Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
  • BackUp Commercial Vehicular Gate Operator
  • 12VDC - 30 Amps Max.
  • 125 lbs. Max. pull @ CSW-200 Units
  • 105 lbs. Max. pull @ SL-3000 Units
 		This is a Gear Reducer (45:1, 1/3-1HP) Replacement Kit. Compatible with 1/3HP & 1HP LiftMaster GH Model Commercial Door Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
Also known as: 3211009, 3290011, 32-11009
K32-34792 Gear Reducer, 30:1 K76-36398 1/2HP Motor, 24V K20-1050C-2LP-H26 Motor, 1/2HP, 1PH, L5
This is a Gear Reducer Replacement Kit (30:1). Compatible with LiftMaster Model SL585 Slide Gate Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
Also known as: 32-34792 		This is a 1/2HP Motor (24VDC) Replacement Kit. Compatible with LiftMaster Models CSW24V & CSL24V Gate Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility. This is a 1/2HP Motor Replacement Kit (115/230V). For use with various LiftMaster Single Phase Logic 5.0 Commercial Door Operator Models. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
Also known as: K20-1050C-2LP-H24
K32-11010 Gear Reducer 44:1, 1-1/2-2HP LiftMaster Frame Kit, H, Left Hand LiftMaster Frame Kit, H, Right Hand
This is a Gear Reducer 44:1, 1-1/2-2HP Replacement Kit. Compatible with 1/2HP, & 2HP LiftMaster GH Model Commercial Door Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
Also known as: 32-11010, 3211010 		This is a Left Hand Frame Kit. For use with various LiftMaster Industrial Duty Commercial Door Operators; manufactured after 2005. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
 		This is a Right Hand Frame Kit. For use with various LiftMaster Industrial Duty Commercial Door Operators; manufactured after 2005. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.