|
|
|
|
|
|
|
|
|
|
|
|
|
|
High performance radio frequency identification devices designed to be installed on the interior or exterior of the vehicle. Must be used with LiftMaster RFID Long Range Reader (LMSC1000)
|
External power supply intended for use with LC-36M Light Curtain or Pre-Sensor Trailer Sensor.
|
Sprocket Kit for MAXUM JDC and JHDC operators.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sprocket Kit for MAXUM JDC and JHDC operators.
|
Sprocket Kit for MAXUM JDC and JHDC operators.
|
Sprocket Kit for MAXUM JDC and JHDC operators.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Additional hoist chain for JHDC units on oversized doors.
|
Use for switching on/off auxiliary devices such as lights, bells, horns, strobes and other warning devices. Board mounts inside the operator cover for easy installation.
|
Accessory board to plug-in a Loop Detector (LOOPDETLM) Board. Mounts inside the operator cover for easy installation. Operating Temperature -20°F to 130°F (-29°C to 54°C)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6" Steel Wheel Cover Ea.
|
Compatible with LiftMaster MAXUM Commercial Door Operators. 4-line LCD display gives you access to more information at all times.
|
Sprocket Kit for MAXUM JDC and JHDC operators.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sprocket Kit for MAXUM JDC and JHDC operators.
|
4" Steel Wheel Cover Ea.
|
Roller Chain #48 for T Operator (1/3HP And 1/2 HP) Doors up to 18'
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sprocket Kit for MAXUM JDC and JHDC operators.
|
Sprocket Kit for MAXUM JDC and JHDC operators.
|
Heavy-Duty Straight Door Arm Assembly Kit. For use with various LiftMaster® Logic 4.0/5.0 and DC MAXUM Industrial-Duty and Extended Duty Jackshaft Hoist Commercial Door Operators.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Take-up Reel, 2-wire, 18 ga., 20' extended
|
Flexible housing maintains alignment position after minor contact.
NEMA 4X enclosure protects against direct water-spray and corrosion.
Dual-sided infrared sensors.
Maximum range of 45 ft.
Solid sensor lights indicate correct sensor alignment.
Polarized cables for proper signal continuity and feedback.
Meets UL 325 Safety Standards.
|
Replacement Interface Box.
Used with CPS Protector Systems.
For use on LiftMaster operators.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sprocket Kit for MAXUM JDC and JHDC operators.
|
Sprocket Kit for MAXUM JDC and JHDC operators.
|
Locks gate arm to the gate's mounting bracket. Compatible with LA400DC and LA412DC Operators
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sprocket Kit for MAXUM JDC and JHDC operators.
|
Sprocket Kit for MAXUM JDC and JHDC operators.
|
Single 6" Solid Steel, Gold Zinc Plated V-Groove Power Wheel with Ball Bearings
6" Power Wheel
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Connects to wireless edge receiver using Low-energy Bluetooth® transmission. Sensing distance up to 130 ft. Transmitter accepts up to 2 wired resistive edges.
|
Pair of 4" Solid Steel, Gold Zinc Plated Groove Power Wheels with Ball Bearings.
|
New mounting brackets for industrial slide gate operators to fit 30” wide post mount.
Supports retrofit of operators that utilize a 30” side post mount.
Durable steel, powder coated c-channel brackets.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3" Shielded Guide Roller
|
600V Transformer Kit.For use with various LiftMaster® MAXUM Series DC 700 lbs. Standard-Duty and Industrial-Duty Commercial Door Operators.
|
208V Transformer Kit.For use with various LiftMaster® MAXUM Series DC 700 lbs. Standard-Duty and Industrial-Duty Commercial Door Operators.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Provides seven field-selectable modifications, including six door traffic control options. Combines with standard Timer-to-Close feature to offer timed, sequenced activation of warning lights, sounders, and other devices (sold separately) that can be operated via dry contact closure.
|
Stand-alone reversing system for LiftMaster MAXUM and Logic commercial door operators, compatible with 4-wire monitored sensing edges.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Monitored Small Profile Resistive Edge with Aluminum Channel. Price per foot.
|
Monitored retro-reflective photo eye. Compatible with LiftMaster Logic 4, Medium Duty, FDC, FDCL, FDOA, and FDOB commercial door operators.
|
Bi-Direction Remote Control for 50-HERK2.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6" Shielded Guide Roller
|
Engineered to last longer, install easier, and provide greater safety than conventional gate hinges. They are designed for industrial, high-traffic application with heavy wrought-iron or aluminum gates.
|
Take-up Reel, 3-wire, 18 ga., 30' extended
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Primary monitored entrapment protection with NEMA 4 enclosure.
Dual-sided infrared sensors.
Heavy-duty housings and brackets.
Maximum range of 45 ft.
For LiftMaster operators only.
|
Engineered to last longer, install easier, and provide greater safety than conventional gate hinges. They are designed for industrial, high-traffic application with heavy wrought-iron or aluminum gates.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Engineered to last longer, install easier, and provide greater safety than conventional gate hinges. They are designed for industrial, high-traffic application with heavy wrought-iron or aluminum gates.
|
600V Transformer Kit.For use with various LiftMaster® MAXUM Series DC 1200 lbs. Standard-Duty and Industrial-Duty Commercial Door Operators.
|
208V Transformer Kit.For use with various LiftMaster® MAXUM Series DC 1200 lbs. Standard-Duty and Industrial-Duty Commercial Door Operators.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Roller cage bearing hinges are engineered for endurance and maximum reliability. The hardened steel, roller cage, needle-bearing system provides 5 times the weight bearing surface, largest weld surface and even-weight distribution.
|
Roller cage bearing hinges are engineered for endurance and maximum reliability. The hardened steel, roller cage, needle-bearing system provides 5 times the weight bearing surface, largest weld surface and even-weight distribution.
|
Plug-in loop detector prevents the door or gate from closing on a vehicle in the path.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The KPW5 comes with a durable blue LED backlight metal keypad and a 5-year lithium battery.
KPW5 is perfect for residential gate access, including solar gate applications, as well as smaller commercial door and gate applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- Elite loop detector
- Plugs into the OmniControl board
- Specifically designed for use on SL3000UL, CSW200UL, and HCT gate operators
|
|
The STAR1000 Commercial Access Receiver with Security+ 2.0, for gate and commercial door operators, delivers best-in-class performance and security. Designed specifically for commercial applications such as parking lots, parking garages and employee gate entrances, the receiver holds up to 1000 remote controls and provides superior range and performance.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Multiple post-mounting options: 3 in. round on the outside, 3 in. round on the inside, 4 in.square welded on the inside
Compatible with operators CSW200UL, SL3000UL, and RSW12V
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Innovative industry leading low-energy Bluetooth® transmission up to 130 ft. range. Protects up to 8 entrapment points. Receiver accepts up to 4 transmitters.
|
The 02-401M Control System is intended for Door Safety. For use with various LiftMaster Logic 4.0/5.0 and MAXUM Series NEMA 4 Commercial Door Operator Applications.
|
Optional interface card allows convenient addition of a secondary safety device to a LiftMaster operator
Continuous self-monitoring system with timer-to-close feature
Industrial code technology.
Durable steel brackets - floor or track mounting.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
V-Track 10'. The image is for the black version
|
Long Range Sensing distance up to 50 ft. Requires power only on one side of the installation. Meets UL 325 Safety Standards.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The KPW250 comes with a durable blue LED backlight metal keypad and a 5- year lithium battery.
KPW250 is perfect for larger commercial applications such as a maintenance door entrance or gated entrance for a small business.
|
Cloud-based smart reader allows residents to use their smartphones as an all-access pass.
|
LiftMaster's KPR2000 is a feature-rich keypad and proximity card reader access controller that is simple to install and looks greate, making it an excellent choice for both residential and commercial applications. A secure and vandal-resistant enclosure with a gray powder coated finish creates an upscale and stylish appearance. A multicolor LED status display and blue backlighting of the keys assures day or night visibility. Install the KPR2000 on any pedestal and pair it with a LiftMaster gate or commercial door operator for a superior complete access control solution.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heater kit for MAXUM DC Commercial Door Operators 120/240V and AC Pad Mount Gate Operators.
|
Heater kit for AC/DC 460V Gate Operators and MAXUM DC Commercial Door Operators 460V.
|
Monitored Thru-Beam Photoelectric Sensors. Long Range Sensing distance up to 90 ft. Meets UL 325 Safety Standards.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed specifically for use with HDSW24UL Heavy Duty gate operator. Moves swing gates up to 4,500 lbs. or 22 ft. in length.
|
Red/Green Traffic Light. Dramatically reduces the chance of potential accidents. Changes from flashing red to solid green when the door reaches the full open position.
|
Cloud-based smart reader and keypad allows residents to use their smartphones as an all-access pass.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Includes: 1300 Magnetic Lock, Junction Box, 12VDC transformer, and Mounting Plate and Hardware
|
Primary safety entrapment protection device compliant with UL 325.
Provides up to 33 ft. of protection range and a minimum of 36 in. of height coverage to keep your customers, employees and equipment safe.
|
Powder coated steel riser for INSL24UL and IHSL24UL Industrial Operators.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ideal for Applications Using Smaller, Lighter Sectional Commercial Doors with Light-Duty Cycle Requirements
|
Motion Detector. Differentiates between people and/or vehicle traffic.
Prevents unwanted door openings.
Closes door after vehicles leaves.
|
For applications using smaller, lighter sectional commercial doors requiring 25 cycles or fewer per day.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ideal for Applications Using Smaller, Lighter Rolling Commercial Doors with Light-Duty Cycle Requirements
|
The Model MT door operator is for use on standard lift sectional doors up to 14' high and up to 12 cycles per hour.
|
For use on standard lift sectional doors up to 14 feet high and up to 12 cycles per hour.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Model MJ door is designed for use on industrial sectional door with high or vertical lift and on small rolling door and grilles. Maximum recommended duty cycle: 12 cycles per hour.
|
T-style trolley commercial door operators are optimal for general
industrial applications. Suspended from the ceiling, the operators are
used on sectional overhead doors with standard lift. T operators are directly
attached to drive and control the door.
|
The Model MH door operator is designed for use on high or vertical lift sectional doors or small rolling doors and grilles. Maximum recommended duty cycle: 12 cycles per hour.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MAXUM Trolley DC commercial operator 120/240V, battery backup capable, for sectional doors (standard lift) up to 700 lbs with standard duty cycle (up to 20 cycles per hour and 90 cycles per day) in NEMA 1 applications.
|
Cloud-based small size video intercom with integrated camera.
|
The Model MHS door operator features Medium-Duty Logic technology and is designed for use on rolling sheet doors. It features an adjustable friction clutch, high-starting torque motor with overload protection, emergency chain hoist with electric interlock, and emergency disconnect chain.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
T-style trolley commercial door operators are optimal for general
industrial applications. Suspended from the ceiling, the operators are
used on sectional overhead doors with standard lift. T operators are directly
attached to drive and control the door.
208/115/240 1 Phase. Includes brake.
|
MAXUM Trolley DC commercial operator 480V, battery backup capable, for sectional doors (standard lift) up to 700 lbs with standard duty cycle (up to 20 cycles per hour and 90 cycles per day) in NEMA 1 applications.
|
The Model J continuous-duty door operator is designed for use on industrial sectional doors with high or vertical lift and small rolling doors and grilles.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MAXUM Trolley DC commercial operator 120/240V, battery backup capable, for sectional doors (standard lift) up to 1200 lbs with standard duty cycle (up to 20 cycles per hour and 90 cycles per day) in NEMA 1 applications.
|
Cloud-based credentialed access control. Controls up to 2 gates/doors/elevators/commercial door operators.
|
MAXUM Jackshaft DC commercial operator 120/240V with battery backup for sectional doors (standard lift, high lift and full vertical) and rolling steel doors/grilles up to 700 lbs with standard duty cycle (up to 20 cycles per hour and 90 cycles per day) in NEMA 1 applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Model J continuous-duty door operator is designed for use on industrial sectional doors with high or vertical lift and small rolling doors and grilles.
|
8ft rail for LiftMaster HCTDCUL. Yellow zinc dichromate finish for maximum rust protection.
|
The Model MGJ Door Operator is designed for use on industrial sectional doors with high or vertical lift and on small rolling doors and grilles. Maximum recommended duty cycle: 12 cycles per hour.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hoist (H) style commercial door operators are optimal for industrial applications. H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
|
MAXUM Trolley DC commercial operator 480V, battery backup capable, for sectional doors (standard lift) up to 1200 lbs with standard duty cycle (up to 20 cycles per hour and 90 cycles per day) in NEMA 1 applications.
|
XL metal solar box for single and dual solar applications (20" x 16"). Compatible with LA400DC, LA412DC and LA500DC arms. Battery not included.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Model J continuous-duty door operator is designed for use on industrial sectional doors with high or vertical lift and small rolling doors and grilles.
|
MAXUM Jackshaft DC commercial operator 480V 3 Ph with battery backup for sectional doors (standard lift, high lift and full vertical) and rolling steel doors/grilles up to 700 lbs with standard duty cycle (up to 20 cycles per hour and 90 cycles per day) in NEMA 1 applications.
|
10ft rail for LiftMaster HCTDCUL. Yellow zinc dichromate finish for maximum rust protection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
T-style trolley commercial door operators are optimal for general
industrial applications. Suspended from the ceiling, the operators are
used on sectional overhead doors with standard lift. T operators are directly
attached to drive and control the door.
208/115/240 1 Phase. Includes Brake.
|
Hoist (H) style commercial door operators are optimal for industrial applications. H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
|
The Model J continuous-duty door operator is designed for use on industrial sectional doors with high or vertical lift and small rolling doors and grilles.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MAXUM Hoist DC commercial operator 120/240V, battery backup capable, for sectional doors (standard lift, high lift and full vertical) and rolling steel doors/grilles up to 700 lbs with standard duty cycle (up to 20 cycles per hour and 90 cycles per day) where a manual hoist is required, in NEMA 1 applications.
|
T-style trolley commercial door operators are optimal for general
industrial applications. Suspended from the ceiling, the operators are
used on sectional overhead doors with standard lift. T operators are directly
attached to drive and control the door.
208/240/460 3 Phase. Includes Brake.
|
MAXUM Hoist DC commercial operator 480V 3 Ph, battery backup capable, for sectional doors (standard lift, high lift and full vertical) and rolling steel doors/grilles up to 700 lbs with standard duty cycle (up to 20 cycles per hour and 90 cycles per day) where a manual hoist is required, in NEMA 1 applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Gearhead Trolley (GT) style commercial door operators employ lubricated gears and are optimal for heavy industrial, high-cycle applications.
|
12ft rail for LiftMaster HCTDCUL. Yellow zinc dichromate finish for maximum rust protection.
|
Hoist (H) style commercial door operators are optimal for industrial applications. H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Model J continuous-duty door operator is designed for use on industrial sectional doors with high or vertical lift and small rolling doors and grilles.
|
The Model J continuous-duty door operator is designed for use on industrial sectional doors with high or vertical lift and small rolling doors and grilles.
|
MAXUM Hoist DC commercial operator 120/240V, battery backup capable, for sectional doors (standard lift, high lift and full vertical) and rolling steel doors/grilles up to 1,200 lbs with standard duty cycle (up to 20 cycles per hour and 90 cycles per day) where a manual hoist is required, in NEMA 1 applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
14ft rail for LiftMaster HCTDCUL. Clear zinc finish for maximum rust protection.
|
Gearhead (GH) style commercial door operators employ lubricated gears for heavy industrial, high cycle applications. GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage. For left hand operators please add $28.00 to the cost.
|
MAXUM Hoist DC commercial operator 120/240V, battery backup capable, for sectional doors (standard lift, high lift and full vertical) and rolling steel doors/grilles up to 1,200 lbs with extended duty cycle (up to 30 cycles per hour and 150 cycles per day) where a manual hoist is required, in NEMA 1 applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
LOGIC 5.0 HOISTED COMMERCIAL DOOR OPERATORS ARE OPTIMAL FOR INDUSTRIAL APPLICATIONS. These operators include a floor-level chain hoist to ease manual operation in an emergency or power outage. The door operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles. H Operators are attached to the door jackshaft to indirectly drive the door.
|
Gearhead (GH) style commercial door operators employ lubricated gears for heavy industrial, high cycle applications. GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
|
Single swing gate light duty opener package. Rated for gates up to 16ft. or 850 lbs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MAXUM Trolley DC commercial operator 120/240V, battery backup capable, for sectional doors (standard lift) up to 1200 lbs with extended duty cycle (up to 30 cycles per hour and 150 cycles per day) in NEMA 1 applications.
|
MAXUM Hoist DC commercial operator 480V, battery backup capable, for sectional doors (standard lift, high lift and full vertical) and rolling steel doors/grilles up to 1,200 lbs with standard duty cycle (up to 20 cycles per hour and 90 cycles per day) where a manual hoist is required, in NEMA 1 applications.
|
Hoist (H) style commercial door operators are optimal for industrial applications. H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Gearhead (GH) style commercial door operators employ lubricated gears for heavy industrial, high cycle applications. GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
|
Gearhead Trolley (GT) style commercial door operators employ lubricated gears and are optimal for heavy industrial, high-cycle applications.
|
Gearhead (GH) style commercial door operators employ lubricated gears for heavy industrial, high cycle applications. GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MAXUM Trolley DC commercial operator 480V, battery backup capable, for sectional doors (standard lift) up to 1200 lbs with extended duty cycle (up to 30 cycles per hour and 150 cycles per day) in NEMA 1 applications.
|
16ft rail for LiftMaster HCTDCUL. Clear zinc finish for maximum rust protection.
|
Gearhead Trolley (GT) style commercial door operators employ lubricated gears and are optimal for heavy industrial, high-cycle applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MAXUM Hoist DC commercial operator 480V, battery backup capable, for sectional doors (standard lift, high lift and full vertical) and rolling steel doors/grilles up to 1,200 lbs with extended duty cycle (up to 30 cycles per hour and 150 cycles per day) where a manual hoist is required, in NEMA 1 applications.
|
MAXUM Hoist DC commercial operator 120/240V, battery backup capable, for sectional doors (standard lift, high lift and full vertical) and rolling steel doors/grilles up to 2,200 lbs with extended duty cycle (up to 30 cycles per hour and 150 cycles per day) where a manual hoist is required, in NEMA 1 applications.
|
Gearhead Trolley (GT) style commercial door operators employ lubricated gears and are optimal for heavy industrial, high-cycle applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Gearhead (GH) style commercial door operators employ lubricated gears for heavy industrial, high cycle applications. GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
|
MAXUM Trolley DC commercial operator 120/240V, battery backup capable, for sectional doors (standard lift) up to 2200 lbs with extended duty cycle (up to 30 cycles per hour and 150 cycles per day) in NEMA 1 applications.
|
Solar optimized system. Rated for gates up to 16ft. or 850 lbs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MAXUM Trolley DC commercial operator 480V, battery backup capable, for sectional doors (standard lift) up to 2200 lbs with extended duty cycle (up to 30 cycles per hour and 150 cycles per day) in NEMA 1 applications.
|
Gearhead (GH) style commercial door operators employ lubricated gears for heavy industrial, high cycle applications. GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
|
Gearhead Trolley (GT) style commercial door operators employ lubricated gears and are optimal for heavy industrial, high-cycle applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sliding Door (SD) style commercial door operators are optimal for
industrial applications. SD-style operators have functionality that is
similar to T-style operators, but they are used on single and bi-parting
sliding doors. These operators are directly attached to drive and
control the door. SD operators are mounted directly above the door.
115/208/240 1 Phase.
|
Sliding Door (SD) style commercial door operators are optimal for
industrial applications. SD-style operators have functionality that is
similar to T-style operators, but they are used on single and bi-parting
sliding doors. These operators are directly attached to drive and
control the door. SD operators are mounted directly above the door.
208/240/460 3 Phase.
|
Cloud-based medium size video intercom with integrated camera.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Specialty overhead operator with battery backup and exceptionally smooth and ultra-quiet operation.
Rated for overhead doors or gates with up to 16 ft. rail or weighing up to 1,000 lbs.
Ideal for multi-unit residential parking facilities and automotive dealerships.
|
Gearhead (GH) style commercial door operators employ lubricated gears for heavy industrial, high cycle applications. GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
|
Sliding Door (SD) style commercial door operators are optimal for
industrial applications. SD-style operators have functionality that is
similar to T-style operators, but they are used on single and bi-parting
sliding doors. These operators are directly attached to drive and
control the door. SD operators are mounted directly above the door.
115/208/240 1 Phase.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Battery backup swing gate operator. Rated for gates up to 18 ft. in length or weighing up to 1,600 lbs.
|
Sliding Door (SD) style commercial door operators are optimal for
industrial applications. SD-style operators have functionality that is
similar to T-style operators, but they are used on single and bi-parting
sliding doors. These operators are directly attached to drive and
control the door. SD operators are mounted directly above the door.
208/240/460 3 Phase. Includes brake.
|
Sliding Door (SD) style commercial door operators are optimal for
industrial applications. SD-style operators have functionality that is
similar to T-style operators, but they are used on single and bi-parting
sliding doors. These operators are directly attached to drive and
control the door. SD operators are mounted directly above the door.
115/208/240 1 Phase. Includes Brake.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sliding Door (SD) style commercial door operators are optimal for
industrial applications. SD-style operators have functionality that is
similar to T-style operators, but they are used on single and bi-parting
sliding doors. These operators are directly attached to drive and
control the door. SD operators are mounted directly above the door.
208/240/460 3 Phase. Includes brake.
|
MAXUM Hoist DC commercial operator 480V, battery backup capable, for sectional doors (standard lift, high lift and full vertical) and rolling steel doors/grilles up to 2,200 lbs with extended duty cycle (up to 30 cycles per hour and 150 cycles per day) where a manual hoist is required, in NEMA 1 applications.
|
Rated for gates up to 25 feet in length or weighing up to 800 pounds.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RFID long range reader. Reads RFID tags 20 – 30' away, reducing vehicle congestion.
|
|
Gearhead Sliding (GSD) style commercial door operators employ lubricated gears for heavy industrial, high cycle applications. GSD-style operators offer functionality that is similar to GT-style operators, but are used on single and bi-parting sliding doors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
½ HP rated for gates up to 37 feet in length and 1,000 lbs.
|
Rated for gates up to 50 feet in length and weighing up to 1,500 pounds. BBU. Engineered for more than a million cycles.
|
Gearhead Sliding (GSD) style commercial door operators employ lubricated gears for heavy industrial, high cycle applications. GSD-style operators offer functionality that is similar to GT-style operators, but are used on single and bi-parting sliding doors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Gearhead Sliding (GSD) style commercial door operators employ lubricated gears for heavy industrial, high cycle applications. GSD-style operators offer functionality that is similar to GT-style operators, but are used on single and bi-parting sliding doors.
|
For high-traffic applications.
Ideal for large gated communities or commercial facilities.
1/2 HP rated for gates 18ft or 1,600 lbs.
Integrates easily with LiftMaster Access Control Technology.
|
.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ideal for high-traffic, heavy-duty application.
Provides battery back-up when the power is down.
Rated For gates up to 18ft. or 1,600 lbs.
Integrates easily with LiftMaster Access Control Technology.
|
LiftMaster DC motor barrier gate with direct drive system for continuous duty. Advanced motion control, smooth vehicle flow with a 2.5s open and close duration. A must where getting in and out quickly matters.
|
Gearhead Sliding (GSD) style commercial door operators employ lubricated gears for heavy industrial, high cycle applications. GSD-style operators offer functionality that is similar to GT-style operators, but are used on single and bi-parting sliding doors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 HP Rated for gates up to 37 feet in length and 2,000 lbs.
|
For high-traffic applications.
Ideal for large gated communities or commercial facilities.
1 HP rated for gates 22ft or 2,000 lbs.
Integrates easily with LiftMaster Access Control Technology.
|
Continuous-duty brushless DC motor. Supports slide gates up to 5,500 pounds and 90-feet long.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For 50 to 50,000 units. Next Gen Connected Access Portal, High Capacity with Video. 4 additional inputs and relays. Open Supervised Device Protocol. Many ways to connect to the internet with confidence. Sleek design.
|
24VDC Heavy-Duty Variable Speed Slide Gate Operator. Ideal for heavy gate and extreme applications. Rated for gates up to 75 ft. and 3,000 lbs. Variable cycle speed of .5 ft./sec. to 1 ft./sec.
|
Gearhead (GH) style commercial door operators employ lubricated gears for heavy industrial, high cycle applications. GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Continuous-duty brushless DC motor. Supports slide gates up to 5500 lbs. and 90 ft.
|
24VDC Heavy-Duty Variable Speed Swing Gate Operator. Ideal for heavy gate and extreme applications. Rated for gates up to 22 ft. or up to 2,800 lbs, 4,500 lbs. with optional arm. Variable cycle speed of 13 – 36 sec for a 90 degree opening.
|
|
|
