Pure gum rubber air hose typically used along with a pneumatic or air wave switch to build an air activated sensing edge. Available in 3/8, 1/2, 3/4 inch inside diameter (I.D.) sizes. All hoses have 1/8" thick walls.

Hard air hose: 3/8� ID, 1/8� wall (sold per foot).

Pure gum rubber air hose typically used along with a pneumatic or air wave switch to build an air activated sensing edge. Available in 3/8, 1/2, 3/4 inch inside diameter (I.D.) sizes. All hoses have 1/8� thick walls.

Pure gum rubber air hose typically used along with a pneumatic or air wave switch to build an air activated sensing edge. Available in 3/8, 1/2, 3/4 inch inside diameter (I.D.) sizes. All hoses have 1/8� thick walls.

ME110 is a streamlined sensing edge designed for applications where performance and appearance are key factors. When touched lightly, or at an angle, ME110 sends an immediate signal to stop and/or reverse operation. This slide-in style edge has multiple mounting channel options, allowing for easy installation with any style counter shutter or grille.

The 1-1/2-inch tall ME111 sensing edge is an ideal solution for counter grilles and shutters in environments that have an uneven surface. The tall profile helps adhere the edge more uniformly to the uneven surface. When touch activated, ME111 sends an immediate signal to stop and or reverse operation. This slide-in style edge has multiple mounting channel options, allowing for easy installation with any style counter shutter or grille.

ME112 is a pressure sensitive sensing edge that is manufactured to user specifications for length and outlet location. When touched activated, ME112 sends an immediate signal to operator controls to stop and/or reverse door operation. This sensing edge retrofits easily to 1-3/8-inch sectional doors with accepting bottom bar, as well as multiple compatible mounting channels. This slide-in style edge features a double-T mounting design, which provides superior stability for sectional overhead commercial doors and material handling system applications.

ME112 is a pressure sensitive sensing edge that is manufactured to user specifications for length and outlet location. When touched activated, ME112 sends an immediate signal to operator controls to stop and/or reverse door operation. This sensing edge retrofits easily to 1-3/8-inch sectional doors with accepting bottom bar, as well as multiple compatible mounting channels. This slide-in style edge features a double-T mounting design, which provides superior stability for sectional overhead commercial doors and material handling system applications.

ME113 is a pressure sensitive sensing edge that is custom manufactured to user specifications for length and outlet location. When touched activated, ME113 sends an immediate signal to operator controls to stop and/or reverse door operation. This slide-in style edge features a double-T mounting design, which provides superior stability for sectional overhead commercial doors and material handling systems applications.

ME113 is a pressure sensitive sensing edge that is custom manufactured to user specifications for length and outlet location. When touched activated, ME113 sends an immediate signal to operator controls to stop and/or reverse door operation. This slide-in style edge features a double-T mounting design, which provides superior stability for sectional overhead commercial doors and material handling systems applications.

MBSAW-500 is an introductory non-monitored Air-Wave sensing edge. When the sensing edge comes into contact with an obstruction, an air pressure wave is pushed through the internal hose to an external Air-Wave switch (sold separately). The diaphramgm inside the switch then activates an electrical contact, which sends a signal to operator controls to stop and/or reverse door operation. The top tab inserts between the double-L angle bottoms bars on a rolling door.

The MEP190 is rugged to handle tough industrial and commercial environments. Its pneumatic design allows a treadle switch to operate safely indoors or out.

MBSAW-500 is an introductory non-monitored Air-Wave sensing edge. When the sensing edge comes into contact with an obstruction, an air pressure wave is pushed through the internal hose to an external Air-Wave switch (sold separately). The diaphramgm inside the switch then activates an electrical contact, which sends a signal to operator controls to stop and/or reverse door operation. The top tab inserts between the double-L angle bottoms bars on a rolling door.

ME120 is ideal for a wide variety of applications, from motorized doors and gates to industrial safeguarding on manufacturing equipment. Applications include: along conveyor systems to detect operator reach in, below lifts to protect from pinch points, and on a wide variety of plant equipment where touch-sensitive detection is desired.

Tech Tip: The ME120 sensing edge paired with the ME120-C5 mounting channel creates a “sweep edge� that safeguards the entrapment zone on driveways and curbs along the path of travel below a swinging gate, as defined by UL 325 and ASTM F2200.

ME120 is ideal for a wide variety of applications, from motorized doors and gates to industrial safeguarding on manufacturing equipment. Applications include: along conveyor systems to detect operator reach in, below lifts to protect from pinch points, and on a wide variety of plant equipment where touch-sensitive detection is desired.

Tech Tip: The ME120 sensing edge paired with the ME120-C5 mounting channel creates a “sweep edge� that safeguards the entrapment zone on driveways and curbs along the path of travel below a swinging gate, as defined by UL 325 and ASTM F2200.

The ME116 sensing edge is specifically designed for 1-3/4 inch thick doors with a bottom retainer. This slide-in style edge features a double-T mounting design, which provides superior stability. ME116 is resistant to flame, water, and most common greases and oils. When touch activated, this pressure sensitive edge sends an immediate signal to controls to stop and/or reverse operation.

The ME116 sensing edge is specifically designed for 1-3/4 inch thick doors with a bottom retainer. This slide-in style edge features a double-T mounting design, which provides superior stability. ME116 is resistant to flame, water, and most common greases and oils. When touch activated, this pressure sensitive edge sends an immediate signal to controls to stop and/or reverse operation.

The ME123 sensing edge is the industry’s go-to, two inch extruded edge designed to fit a variety of door applications. It is custom manufactured to specified color and length. When touched lightly, ME123 will send an immediate electrical signal to operator controls to stop and/or reverse gate operation. This slide-in style edge features a double-T mounting design which provides superior stability.

The ME123 sensing edge is the industry’s go-to, two inch extruded edge designed to fit a variety of door applications. It is custom manufactured to specified color and length. When touched lightly, ME123 will send an immediate electrical signal to operator controls to stop and/or reverse gate operation. This slide-in style edge features a double-T mounting design which provides superior stability.

The MG123 sensing edge is the gate industry’s go-to 2 inch extruded edge. It is designed to fit a variety of applications and is custom manufactured to your specified length. When touched lightly, MG123 will send an immediate electrical signal to operator controls to stop and/or reverse gate operation. This slide-in style edge features a double-T mounting design which provides superior stability.

The MG123 sensing edge is the gate industry’s go-to 2 inch extruded edge. It is designed to fit a variety of applications and is custom manufactured to your specified length. When touched lightly, MG123 will send an immediate electrical signal to operator controls to stop and/or reverse gate operation. This slide-in style edge features a double-T mounting design which provides superior stability.

The ME117 sensing edge has an added layer of PVC, creating a hollow pocket on the bottom of the edge. This hollow pocket conforms to irregularities in the surface which help prevent dust and debris from passing the threshold. ME117 is designed to fit doors from 1 to 2-inch thick. When touch activated, ME117 sends an immediate signal to controls to stop and/or reverse operation. A mounting channel is available for easy installation on machinery applications.

The ME117 sensing edge has an added layer of PVC, creating a hollow pocket on the bottom of the edge. This hollow pocket conforms to irregularities in the surface which help prevent dust and debris from passing the threshold. ME117 is designed to fit doors from 1 to 2-inch thick. When touch activated, ME117 sends an immediate signal to controls to stop and/or reverse operation. A mounting channel is available for easy installation on machinery applications.

The small profile of the MG110 electric sensing edge is specially designed to protect draw-in posts, pockets, and pivot points in gate installations. When touched lightly, MG110 will send an immediate electrical signal to operator controls to stop and/or reverse gate operation. The MG110 kit includes: (1) MG110 sensing edge, (1) ME110-C mounting channel, (2) molded nylon end caps, and (2) stainless steel self-drilling mounting screws.

The MT sensing edge product line consists of three standard models: MT21 (2 in W x 1 in H), MT22 (2 in W x 2 in H), and MT33 (3 in W x 3 in H). When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation. The MT edge switch is covered in a durable vinyl jacket. The top tab inserts between the double-L angle bottoms bars on a rolling door. These sensing edges are flexible and can conform to irregularities in the floor.

The MT sensing edge product line consists of three standard models: MT21 (2 in W x 1 in H), MT22 (2 in W x 2 in H), and MT33 (3 in W x 3 in H). When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation. The MT edge switch is covered in a durable vinyl jacket. The top tab inserts between the double-L angle bottoms bars on a rolling door. These sensing edges are flexible and can conform to irregularities in the floor.

The 1-1/2-inch tall ME111 sensing edge is an ideal solution for counter grilles and shutters in environments that have an uneven surface. The tall profile helps adhere the edge more uniformly to the uneven surface. When touch activated, ME111 sends an immediate signal to stop and or reverse operation. This slide-in style edge has multiple mounting channel options, allowing for easy installation with any style counter shutter or grille.

The MT sensing edge product line consists of three standard models: MT21 (2 in W x 1 in H), MT22 (2 in W x 2 in H), and MT33 (3 in W x 3 in H). When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation. The MT edge switch is covered in a durable vinyl jacket. The top tab inserts between the double-L angle bottoms bars on a rolling door. These sensing edges are flexible and can conform to irregularities in the floor.

The MT sensing edge product line consists of three standard models: MT21 (2 in W x 1 in H), MT22 (2 in W x 2 in H), and MT33 (3 in W x 3 in H). When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation. The MT edge switch is covered in a durable vinyl jacket. The top tab inserts between the double-L angle bottoms bars on a rolling door. These sensing edges are flexible and can conform to irregularities in the floor.

The MT sensing edge product line consists of three standard models: MT21 (2 in W x 1 in H), MT22 (2 in W x 2 in H), and MT33 (3 in W x 3 in H). When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation. The MT edge switch is covered in a durable vinyl jacket. The top tab inserts between the double-L angle bottoms bars on a rolling door. These sensing edges are flexible and can conform to irregularities in the floor.

The MT sensing edge product line consists of three standard models: MT21 (2 in W x 1 in H), MT22 (2 in W x 2 in H), and MT33 (3 in W x 3 in H). When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation. The MT edge switch is covered in a durable vinyl jacket. The top tab inserts between the double-L angle bottoms bars on a rolling door. These sensing edges are flexible and can conform to irregularities in the floor.

The MT sensing edge product line consists of three standard models: MT21 (2 in W x 1 in H), MT22 (2 in W x 2 in H), and MT33 (3 in W x 3 in H). When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation. The MT edge switch is covered in a durable vinyl jacket. The top tab inserts between the double-L angle bottoms bars on a rolling door. These sensing edges are flexible and can conform to irregularities in the floor.

MU-style sensing edges mount directly to the bottom of a commercial sectional door or material handling system, no mounting channel required. The durable vinyl jacket that covers the internal switch forms two top tabs that were designed to wrap around a leading edge. The flexibility of the MU21 sensing edge allows it to conform to slight irregularities in the floor or other surface. When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation.

MU-style sensing edges mount directly to the bottom of a commercial sectional door or material handling system, no mounting channel required. The durable vinyl jacket that covers the internal switch forms two top tabs that were designed to wrap around a leading edge. The flexibility of the MU21 sensing edge allows it to conform to slight irregularities in the floor or other surface. When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation.

The MT sensing edge product line consists of three standard models: MT21 (2 in W x 1 in H), MT22 (2 in W x 2 in H), and MT33 (3 in W x 3 in H). When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation. The MT edge switch is covered in a durable vinyl jacket. The top tab inserts between the double-L angle bottoms bars on a rolling door. These sensing edges are flexible and can conform to irregularities in the floor.

Designed for application on two-inch thick doors, MU22 can be custom manufactured to accommodate the required length for commercial sectional doors and material handling systems. MU22 is engineered to send an immediate signal to stop and/or reverse operator controls when lightly touched. With the ability to mount vertically or horizontally and no mounting channel required, MU22 is a UL325 Recognized Component that is flexible, durable, and dependable. Available in various colors, lengths, and outlet locations to meet customer specifications.

Designed for application on two-inch thick doors, MU22 can be custom manufactured to accommodate the required length for commercial sectional doors and material handling systems. MU22 is engineered to send an immediate signal to stop and/or reverse operator controls when lightly touched. With the ability to mount vertically or horizontally and no mounting channel required, MU22 is a UL325 Recognized Component that is flexible, durable, and dependable. Available in various colors, lengths, and outlet locations to meet customer specifications.

The MT sensing edge product line consists of three standard models: MT21 (2 in W x 1 in H), MT22 (2 in W x 2 in H), and MT33 (3 in W x 3 in H). When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation. The MT edge switch is covered in a durable vinyl jacket. The top tab inserts between the double-L angle bottoms bars on a rolling door. These sensing edges are flexible and can conform to irregularities in the floor.

The MT sensing edge product line consists of three standard models: MT21 (2 in W x 1 in H), MT22 (2 in W x 2 in H), and MT33 (3 in W x 3 in H). When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation. The MT edge switch is covered in a durable vinyl jacket. The top tab inserts between the double-L angle bottoms bars on a rolling door. These sensing edges are flexible and can conform to irregularities in the floor.

MU-style sensing edges mount directly to the bottom of a commercial sectional door or material handling system, no mounting channel required. The durable vinyl jacket that covers the internal switch forms two top tabs that were designed to wrap around a leading edge. The flexibility of the MU21 sensing edge allows it to conform to slight irregularities in the floor or other surface. When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation.

MU-style sensing edges mount directly to the bottom of a commercial sectional door or material handling system, no mounting channel required. The durable vinyl jacket that covers the internal switch forms two top tabs that were designed to wrap around a leading edge. The flexibility of the MU21 sensing edge allows it to conform to slight irregularities in the floor or other surface. When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation.

Designed for application on two-inch thick doors, MU22 can be custom manufactured to accommodate the required length for commercial sectional doors and material handling systems. MU22 is engineered to send an immediate signal to stop and/or reverse operator controls when lightly touched. With the ability to mount vertically or horizontally and no mounting channel required, MU22 is a UL325 Recognized Component that is flexible, durable, and dependable. Available in various colors, lengths, and outlet locations to meet customer specifications.

The ME123 sensing edge is the industry’s go-to, two inch extruded edge designed to fit a variety of door applications. It is custom manufactured to specified color and length. When touched lightly, ME123 will send an immediate electrical signal to operator controls to stop and/or reverse gate operation. This slide-in style edge features a double-T mounting design which provides superior stability.

The MG123 sensing edge is the gate industry’s go-to 2 inch extruded edge. It is designed to fit a variety of applications and is custom manufactured to your specified length. When touched lightly, MG123 will send an immediate electrical signal to operator controls to stop and/or reverse gate operation. This slide-in style edge features a double-T mounting design which provides superior stability.

Designed for application on two-inch thick doors, MU22 can be custom manufactured to accommodate the required length for commercial sectional doors and material handling systems. MU22 is engineered to send an immediate signal to stop and/or reverse operator controls when lightly touched. With the ability to mount vertically or horizontally and no mounting channel required, MU22 is a UL325 Recognized Component that is flexible, durable, and dependable. Available in various colors, lengths, and outlet locations to meet customer specifications.

Designed for application on two-inch thick doors, MU22 can be custom manufactured to accommodate the required length for commercial sectional doors and material handling systems. MU22 is engineered to send an immediate signal to stop and/or reverse operator controls when lightly touched. With the ability to mount vertically or horizontally and no mounting channel required, MU22 is a UL325 Recognized Component that is flexible, durable, and dependable. Available in various colors, lengths, and outlet locations to meet customer specifications.

ME112 is a pressure sensitive sensing edge that is manufactured to user specifications for length and outlet location. When touched activated, ME112 sends an immediate signal to operator controls to stop and/or reverse door operation. This sensing edge retrofits easily to 1-3/8-inch sectional doors with accepting bottom bar, as well as multiple compatible mounting channels. This slide-in style edge features a double-T mounting design, which provides superior stability for sectional overhead commercial doors and material handling system applications.

ME113 is a pressure sensitive sensing edge that is custom manufactured to user specifications for length and outlet location. When touched activated, ME113 sends an immediate signal to operator controls to stop and/or reverse door operation. This slide-in style edge features a double-T mounting design, which provides superior stability for sectional overhead commercial doors and material handling systems applications.

The ME116 sensing edge is specifically designed for 1-3/4 inch thick doors with a bottom retainer. This slide-in style edge features a double-T mounting design, which provides superior stability. ME116 is resistant to flame, water, and most common greases and oils. When touch activated, this pressure sensitive edge sends an immediate signal to controls to stop and/or reverse operation.

The MC110 sensing edge is designed for rolling counter shutter and grille applications, prioritizing both performance and aesthetics. When touched lightly, or at an angle, MC110 sends an immediate signal to stop and/or reverse operation. This slide-in style sensing edge integrates a unique guide cap design that efficiently blocks light along the ends of the sensing edge. Additionally, the design contributes to enhancing building efficiency by minimizing air gaps. It further acts as a barrier to pests in food service areas. MC110 contributes to an integrated appearance that seamlessly complements the overall look of a counter shutter or grille.

The MC271 sensing edge is custom manufactured to your exact specifications for length and outlet location. When touched lightly or at an angle, MC271 will send an immediate electrical signal to operator controls to stop, and/or reverse operations. Made with a vinyl wrapping and an extruded T, it is designed to slide into applicable door’s bottom retainer. The exterior of the MC271 is highly flexible and can conform to irregularities in the floor.

The MC22 sensing edge is custom manufactured to your exact specifications for length and outlet location. When touched lightly or at an angle, MC22 will send an immediate electrical signal to operator controls to stop, and/or reverse operations. Made with a vinyl wrapping and an extruded T, it is designed to slide into applicable door’s bottom retainer. The exterior of the MC22 is highly flexible and can conform to irregularities in the floor.

The MC22 sensing edge is custom manufactured to your exact specifications for length and outlet location. When touched lightly or at an angle, MC22 will send an immediate electrical signal to operator controls to stop, and/or reverse operations. Made with a vinyl wrapping and an extruded T, it is designed to slide into applicable door’s bottom retainer. The exterior of the MC22 is highly flexible and can conform to irregularities in the floor.

ME120 is ideal for a wide variety of applications, from motorized doors and gates to industrial safeguarding on manufacturing equipment. Applications include: along conveyor systems to detect operator reach in, below lifts to protect from pinch points, and on a wide variety of plant equipment where touch-sensitive detection is desired.

Tech Tip: The ME120 sensing edge paired with the ME120-C5 mounting channel creates a “sweep edge� that safeguards the entrapment zone on driveways and curbs along the path of travel below a swinging gate, as defined by UL 325 and ASTM F2200.

The MC22 sensing edge is custom manufactured to your exact specifications for length and outlet location. When touched lightly or at an angle, MC22 will send an immediate electrical signal to operator controls to stop, and/or reverse operations. Made with a vinyl wrapping and an extruded T, it is designed to slide into applicable door’s bottom retainer. The exterior of the MC22 is highly flexible and can conform to irregularities in the floor.

The MC22 sensing edge is custom manufactured to your exact specifications for length and outlet location. When touched lightly or at an angle, MC22 will send an immediate electrical signal to operator controls to stop, and/or reverse operations. Made with a vinyl wrapping and an extruded T, it is designed to slide into applicable door’s bottom retainer. The exterior of the MC22 is highly flexible and can conform to irregularities in the floor.

The MC22 sensing edge is custom manufactured to your exact specifications for length and outlet location. When touched lightly or at an angle, MC22 will send an immediate electrical signal to operator controls to stop, and/or reverse operations. Made with a vinyl wrapping and an extruded T, it is designed to slide into applicable door’s bottom retainer. The exterior of the MC22 is highly flexible and can conform to irregularities in the floor.

The ME117 sensing edge has an added layer of PVC, creating a hollow pocket on the bottom of the edge. This hollow pocket conforms to irregularities in the surface which help prevent dust and debris from passing the threshold. ME117 is designed to fit doors from 1 to 2-inch thick. When touch activated, ME117 sends an immediate signal to controls to stop and/or reverse operation. A mounting channel is available for easy installation on machinery applications.

The MGR20 and MGS20 sensing edges offer three-sided activation for an added measure of protection. They directly mount to a 2 inch post by wrapping around the leading edge of a gate; no mounting channel required. MGR20 is designed for round applications and MGS20 is designed for square applications. Both models are custom manufactured to user specifications for color, length, and outlet location.

The MGR20 and MGS20 sensing edges offer three-sided activation for an added measure of protection. They directly mount to a 2 inch post by wrapping around the leading edge of a gate; no mounting channel required. MGR20 is designed for round applications and MGS20 is designed for square applications. Both models are custom manufactured to user specifications for color, length, and outlet location.

The MT sensing edge product line consists of three standard models: MT21 (2 in W x 1 in H), MT22 (2 in W x 2 in H), and MT33 (3 in W x 3 in H). When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation. The MT edge switch is covered in a durable vinyl jacket. The top tab inserts between the double-L angle bottoms bars on a rolling door. These sensing edges are flexible and can conform to irregularities in the floor.

The MT sensing edge product line consists of three standard models: MT21 (2 in W x 1 in H), MT22 (2 in W x 2 in H), and MT33 (3 in W x 3 in H). When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation. The MT edge switch is covered in a durable vinyl jacket. The top tab inserts between the double-L angle bottoms bars on a rolling door. These sensing edges are flexible and can conform to irregularities in the floor.

The MT sensing edge product line consists of three standard models: MT21 (2 in W x 1 in H), MT22 (2 in W x 2 in H), and MT33 (3 in W x 3 in H). When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation. The MT edge switch is covered in a durable vinyl jacket. The top tab inserts between the double-L angle bottoms bars on a rolling door. These sensing edges are flexible and can conform to irregularities in the floor.

The MT sensing edge product line consists of three standard models: MT21 (2 in W x 1 in H), MT22 (2 in W x 2 in H), and MT33 (3 in W x 3 in H). When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation. The MT edge switch is covered in a durable vinyl jacket. The top tab inserts between the double-L angle bottoms bars on a rolling door. These sensing edges are flexible and can conform to irregularities in the floor.

MU-style sensing edges mount directly to the bottom of a commercial sectional door or material handling system, no mounting channel required. The durable vinyl jacket that covers the internal switch forms two top tabs that were designed to wrap around a leading edge. The flexibility of the MU21 sensing edge allows it to conform to slight irregularities in the floor or other surface. When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation.

MU-style sensing edges mount directly to the bottom of a commercial sectional door or material handling system, no mounting channel required. The durable vinyl jacket that covers the internal switch forms two top tabs that were designed to wrap around a leading edge. The flexibility of the MU21 sensing edge allows it to conform to slight irregularities in the floor or other surface. When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation.

Clima-Guard functions exactly like a pressure sensitive electric edge, but with an added layer of protection. The protective loop seal conforms to irregularities in the floor and helps prevent air infiltration and serves as a weather barrier. Clima-Guard is made up of an ME112 sensing edge paired with a PVC loop seal that comes with a double slot mounting channel.

Designed for application on two-inch thick doors, MU22 can be custom manufactured to accommodate the required length for commercial sectional doors and material handling systems. MU22 is engineered to send an immediate signal to stop and/or reverse operator controls when lightly touched. With the ability to mount vertically or horizontally and no mounting channel required, MU22 is a UL325 Recognized Component that is flexible, durable, and dependable. Available in various colors, lengths, and outlet locations to meet customer specifications.

Designed for application on two-inch thick doors, MU22 can be custom manufactured to accommodate the required length for commercial sectional doors and material handling systems. MU22 is engineered to send an immediate signal to stop and/or reverse operator controls when lightly touched. With the ability to mount vertically or horizontally and no mounting channel required, MU22 is a UL325 Recognized Component that is flexible, durable, and dependable. Available in various colors, lengths, and outlet locations to meet customer specifications.

Clima-Guard functions exactly like a pressure sensitive electric edge, but with an added layer of protection. The protective loop seal conforms to irregularities in the floor and helps prevent air infiltration and serves as a weather barrier. Clima-Guard is made up of an ME112 sensing edge paired with a PVC loop seal that comes with a double slot mounting channel.

The MT sensing edge product line consists of three standard models: MT21 (2 in W x 1 in H), MT22 (2 in W x 2 in H), and MT33 (3 in W x 3 in H). When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation. The MT edge switch is covered in a durable vinyl jacket. The top tab inserts between the double-L angle bottoms bars on a rolling door. These sensing edges are flexible and can conform to irregularities in the floor.

The MT sensing edge product line consists of three standard models: MT21 (2 in W x 1 in H), MT22 (2 in W x 2 in H), and MT33 (3 in W x 3 in H). When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation. The MT edge switch is covered in a durable vinyl jacket. The top tab inserts between the double-L angle bottoms bars on a rolling door. These sensing edges are flexible and can conform to irregularities in the floor.

The MT sensing edge product line consists of three standard models: MT21 (2 in W x 1 in H), MT22 (2 in W x 2 in H), and MT33 (3 in W x 3 in H). When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation. The MT edge switch is covered in a durable vinyl jacket. The top tab inserts between the double-L angle bottoms bars on a rolling door. These sensing edges are flexible and can conform to irregularities in the floor.

The MC22 sensing edge is custom manufactured to your exact specifications for length and outlet location. When touched lightly or at an angle, MC22 will send an immediate electrical signal to operator controls to stop, and/or reverse operations. Made with a vinyl wrapping and an extruded T, it is designed to slide into applicable door’s bottom retainer. The exterior of the MC22 is highly flexible and can conform to irregularities in the floor.

The MC22 sensing edge is custom manufactured to your exact specifications for length and outlet location. When touched lightly or at an angle, MC22 will send an immediate electrical signal to operator controls to stop, and/or reverse operations. Made with a vinyl wrapping and an extruded T, it is designed to slide into applicable door’s bottom retainer. The exterior of the MC22 is highly flexible and can conform to irregularities in the floor.

The MT sensing edge product line consists of three standard models: MT21 (2 in W x 1 in H), MT22 (2 in W x 2 in H), and MT33 (3 in W x 3 in H). When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation. The MT edge switch is covered in a durable vinyl jacket. The top tab inserts between the double-L angle bottoms bars on a rolling door. These sensing edges are flexible and can conform to irregularities in the floor.

The MT sensing edge product line consists of three standard models: MT21 (2 in W x 1 in H), MT22 (2 in W x 2 in H), and MT33 (3 in W x 3 in H). When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation. The MT edge switch is covered in a durable vinyl jacket. The top tab inserts between the double-L angle bottoms bars on a rolling door. These sensing edges are flexible and can conform to irregularities in the floor.

MU-style sensing edges mount directly to the bottom of a commercial sectional door or material handling system, no mounting channel required. The durable vinyl jacket that covers the internal switch forms two top tabs that were designed to wrap around a leading edge. The flexibility of the MU21 sensing edge allows it to conform to slight irregularities in the floor or other surface. When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation.

The MT sensing edge product line consists of three standard models: MT21 (2 in W x 1 in H), MT22 (2 in W x 2 in H), and MT33 (3 in W x 3 in H). When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation. The MT edge switch is covered in a durable vinyl jacket. The top tab inserts between the double-L angle bottoms bars on a rolling door. These sensing edges are flexible and can conform to irregularities in the floor.

The MT sensing edge product line consists of three standard models: MT21 (2 in W x 1 in H), MT22 (2 in W x 2 in H), and MT33 (3 in W x 3 in H). When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation. The MT edge switch is covered in a durable vinyl jacket. The top tab inserts between the double-L angle bottoms bars on a rolling door. These sensing edges are flexible and can conform to irregularities in the floor.

The three-inch wide MU33 sensing edge was specially developed for aircraft hangar doors and material handling systems. MU33 is manufactured to your exact specifications for color, length, and outlet location. Install by wrapping the top tabs around the leading edge of a three-inch thick door or surface to minimize risk of injury and damage to aircraft and other equipment. The flexible jacket that covers the internal edge switch allows MU33 to conform to slight irregularities in the floor or other surfaces. When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation.

The three-inch wide MU33 sensing edge was specially developed for aircraft hangar doors and material handling systems. MU33 is manufactured to your exact specifications for color, length, and outlet location. Install by wrapping the top tabs around the leading edge of a three-inch thick door or surface to minimize risk of injury and damage to aircraft and other equipment. The flexible jacket that covers the internal edge switch allows MU33 to conform to slight irregularities in the floor or other surfaces. When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation.

The three-inch wide MU33 sensing edge was specially developed for aircraft hangar doors and material handling systems. MU33 is manufactured to your exact specifications for color, length, and outlet location. Install by wrapping the top tabs around the leading edge of a three-inch thick door or surface to minimize risk of injury and damage to aircraft and other equipment. The flexible jacket that covers the internal edge switch allows MU33 to conform to slight irregularities in the floor or other surfaces. When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation.

The three-inch wide MU33 sensing edge was specially developed for aircraft hangar doors and material handling systems. MU33 is manufactured to your exact specifications for color, length, and outlet location. Install by wrapping the top tabs around the leading edge of a three-inch thick door or surface to minimize risk of injury and damage to aircraft and other equipment. The flexible jacket that covers the internal edge switch allows MU33 to conform to slight irregularities in the floor or other surfaces. When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation.

The three-inch wide MU33 sensing edge was specially developed for aircraft hangar doors and material handling systems. MU33 is manufactured to your exact specifications for color, length, and outlet location. Install by wrapping the top tabs around the leading edge of a three-inch thick door or surface to minimize risk of injury and damage to aircraft and other equipment. The flexible jacket that covers the internal edge switch allows MU33 to conform to slight irregularities in the floor or other surfaces. When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation.

The three-inch wide MU33 sensing edge was specially developed for aircraft hangar doors and material handling systems. MU33 is manufactured to your exact specifications for color, length, and outlet location. Install by wrapping the top tabs around the leading edge of a three-inch thick door or surface to minimize risk of injury and damage to aircraft and other equipment. The flexible jacket that covers the internal edge switch allows MU33 to conform to slight irregularities in the floor or other surfaces. When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation.

The three-inch wide MU33 sensing edge was specially developed for aircraft hangar doors and material handling systems. MU33 is manufactured to your exact specifications for color, length, and outlet location. Install by wrapping the top tabs around the leading edge of a three-inch thick door or surface to minimize risk of injury and damage to aircraft and other equipment. The flexible jacket that covers the internal edge switch allows MU33 to conform to slight irregularities in the floor or other surfaces. When touched lightly, the sensing edge will send an immediate signal to operator controls to stop and/or reverse door operation.

The Miller Edge pneumatic switch offers a reliable, cost-effective alternative to an electric sensing edge, ideal for extremely wet, refrigerated doors subject to condensation, and low temperature climates. The PS20A switch enclosure accepts an air hose connection. When the hose is compressed, air is forced into the diaphragm and the switch is activated. This converts the pressure wave into an electrical contact, which signals the commercial door operator to stop and/or reverse motion. Pneumatic switches are compatible with pneumatic configured sensing edges and treadles, and are non-monitored..

The Miller Edge Air-Wave switch was developed for applications such as extremely wet and/or refrigerated areas subject to condensation, cold climates, high vibration environments, and other areas where a monitored electric sensing edge is not ideal.

The Air-Wave switch activates when a wave of air is compressed through an air hose and triggers the internal diaphragm. This converts the pressure wave into an electrical contact, which signals the commercial door operator to stop and/or reverse motion. Air-Wave switches have adjustable sensitivity and are available in three models to suit each unique application.

Air-Wave switches are compatible with Air-Wave configured sensing edges and treadles, and are non-monitored.

CPT210 is a UL 325 recognized sensing edge designed for on-site configuration and assembly. Upon contact with an obstruction, the edge signals operator controls to immediately stop and/or reverse motion. The compact profile of CPT210 makes it an ideal choice for narrow surfaces and pinch points. Easily cut down the CPT210 extrusion to the required length at the job site, ensuring a quick turnaround time. The advanced design of the CPT210 cap, cage, and plug provides a sealed assembly, eliminating the need for adhesive. This feature not only provides flexibility for field length adjustment but also allows users to choose the appropriate termination for monitoring compatibility with the operator. Experience the efficiency and adaptability of CPT210 for seamless integration into your safety systems.

CPT210 is a UL 325 recognized sensing edge designed for on-site configuration and assembly. Upon contact with an obstruction, the edge signals operator controls to immediately stop and/or reverse motion. The compact profile of CPT210 makes it an ideal choice for narrow surfaces and pinch points. Easily cut down the CPT210 extrusion to the required length at the job site, ensuring a quick turnaround time. The advanced design of the CPT210 cap, cage, and plug provides a sealed assembly, eliminating the need for adhesive. This feature not only provides flexibility for field length adjustment but also allows users to choose the appropriate termination for monitoring compatibility with the operator. Experience the efficiency and adaptability of CPT210 for seamless integration into your safety systems.

The Miller Edge pneumatic switch offers a reliable, cost-effective alternative to an electric sensing edge, ideal for extremely wet, refrigerated doors subject to condensation, and low temperature climates. The PS20A switch enclosure accepts an air hose connection. When the hose is compressed, air is forced into the diaphragm and the switch is activated. This converts the pressure wave into an electrical contact, which signals the commercial door operator to stop and/or reverse motion. Pneumatic switches are compatible with pneumatic configured sensing edges and treadles, and are non-monitored..

The Miller Edge pneumatic switch offers a reliable, cost-effective alternative to an electric sensing edge, ideal for extremely wet, refrigerated doors subject to condensation, and low temperature climates. The PS20A switch enclosure accepts an air hose connection. When the hose is compressed, air is forced into the diaphragm and the switch is activated. This converts the pressure wave into an electrical contact, which signals the commercial door operator to stop and/or reverse motion. Pneumatic switches are compatible with pneumatic configured sensing edges and treadles, and are non-monitored..

The Miller Edge Air-Wave switch was developed for applications such as extremely wet and/or refrigerated areas subject to condensation, cold climates, high vibration environments, and other areas where a monitored electric sensing edge is not ideal.

The Air-Wave switch activates when a wave of air is compressed through an air hose and triggers the internal diaphragm. This converts the pressure wave into an electrical contact, which signals the commercial door operator to stop and/or reverse motion. Air-Wave switches have adjustable sensitivity and are available in three models to suit each unique application.

Air-Wave switches are compatible with Air-Wave configured sensing edges and treadles, and are non-monitored.

The Miller Edge pneumatic switch offers a reliable, cost-effective alternative to an electric sensing edge, ideal for extremely wet, refrigerated doors subject to condensation, and low temperature climates. The PS20A switch enclosure accepts an air hose connection. When the hose is compressed, air is forced into the diaphragm and the switch is activated. This converts the pressure wave into an electrical contact, which signals the commercial door operator to stop and/or reverse motion. Pneumatic switches are compatible with pneumatic configured sensing edges and treadles, and are non-monitored..

The Miller Edge Air-Wave switch was developed for applications such as extremely wet and/or refrigerated areas subject to condensation, cold climates, high vibration environments, and other areas where a monitored electric sensing edge is not ideal.

The Air-Wave switch activates when a wave of air is compressed through an air hose and triggers the internal diaphragm. This converts the pressure wave into an electrical contact, which signals the commercial door operator to stop and/or reverse motion. Air-Wave switches have adjustable sensitivity and are available in three models to suit each unique application.

Air-Wave switches are compatible with Air-Wave configured sensing edges and treadles, and are non-monitored.

The Miller Edge pneumatic switch offers a reliable, cost-effective alternative to an electric sensing edge, ideal for extremely wet, refrigerated doors subject to condensation, and low temperature climates. The PS20A switch enclosure accepts an air hose connection. When the hose is compressed, air is forced into the diaphragm and the switch is activated. This converts the pressure wave into an electrical contact, which signals the commercial door operator to stop and/or reverse motion. Pneumatic switches are compatible with pneumatic configured sensing edges and treadles, and are non-monitored..

The Miller Edge Air-Wave switch was developed for applications such as extremely wet and/or refrigerated areas subject to condensation, cold climates, high vibration environments, and other areas where a monitored electric sensing edge is not ideal.

The Air-Wave switch activates when a wave of air is compressed through an air hose and triggers the internal diaphragm. This converts the pressure wave into an electrical contact, which signals the commercial door operator to stop and/or reverse motion. Air-Wave switches have adjustable sensitivity and are available in three models to suit each unique application.

Air-Wave switches are compatible with Air-Wave configured sensing edges and treadles, and are non-monitored.

The Miller Edge Air-Wave switch was developed for applications such as extremely wet and/or refrigerated areas subject to condensation, cold climates, high vibration environments, and other areas where a monitored electric sensing edge is not ideal.

The Air-Wave switch activates when a wave of air is compressed through an air hose and triggers the internal diaphragm. This converts the pressure wave into an electrical contact, which signals the commercial door operator to stop and/or reverse motion. Air-Wave switches have adjustable sensitivity and are available in three models to suit each unique application.

Air-Wave switches are compatible with Air-Wave configured sensing edges and treadles, and are non-monitored.

The Miller Edge Air-Wave switch was developed for applications such as extremely wet and/or refrigerated areas subject to condensation, cold climates, high vibration environments, and other areas where a monitored electric sensing edge is not ideal.

The Air-Wave switch activates when a wave of air is compressed through an air hose and triggers the internal diaphragm. This converts the pressure wave into an electrical contact, which signals the commercial door operator to stop and/or reverse motion. Air-Wave switches have adjustable sensitivity and are available in three models to suit each unique application.

Air-Wave switches are compatible with Air-Wave configured sensing edges and treadles, and are non-monitored.

The Miller Edge Air-Wave switch was developed for applications such as extremely wet and/or refrigerated areas subject to condensation, cold climates, high vibration environments, and other areas where a monitored electric sensing edge is not ideal.

The Air-Wave switch activates when a wave of air is compressed through an air hose and triggers the internal diaphragm. This converts the pressure wave into an electrical contact, which signals the commercial door operator to stop and/or reverse motion. Air-Wave switches have adjustable sensitivity and are available in three models to suit each unique application.

Air-Wave switches are compatible with Air-Wave configured sensing edges and treadles, and are non-monitored.

The Miller Edge Air-Wave switch was developed for applications such as extremely wet and/or refrigerated areas subject to condensation, cold climates, high vibration environments, and other areas where a monitored electric sensing edge is not ideal.

The Air-Wave switch activates when a wave of air is compressed through an air hose and triggers the internal diaphragm. This converts the pressure wave into an electrical contact, which signals the commercial door operator to stop and/or reverse motion. Air-Wave switches have adjustable sensitivity and are available in three models to suit each unique application.

Air-Wave switches are compatible with Air-Wave configured sensing edges and treadles, and are non-monitored.

The Miller Edge Air-Wave switch was developed for applications such as extremely wet and/or refrigerated areas subject to condensation, cold climates, high vibration environments, and other areas where a monitored electric sensing edge is not ideal.

The Air-Wave switch activates when a wave of air is compressed through an air hose and triggers the internal diaphragm. This converts the pressure wave into an electrical contact, which signals the commercial door operator to stop and/or reverse motion. Air-Wave switches have adjustable sensitivity and are available in three models to suit each unique application.

Air-Wave switches are compatible with Air-Wave configured sensing edges and treadles, and are non-monitored.

The Miller Edge Air-Wave switch was developed for applications such as extremely wet and/or refrigerated areas subject to condensation, cold climates, high vibration environments, and other areas where a monitored electric sensing edge is not ideal.

The Air-Wave switch activates when a wave of air is compressed through an air hose and triggers the internal diaphragm. This converts the pressure wave into an electrical contact, which signals the commercial door operator to stop and/or reverse motion. Air-Wave switches have adjustable sensitivity and are available in three models to suit each unique application.

Air-Wave switches are compatible with Air-Wave configured sensing edges and treadles, and are non-monitored.

The Miller Edge Air-Wave switch was developed for applications such as extremely wet and/or refrigerated areas subject to condensation, cold climates, high vibration environments, and other areas where a monitored electric sensing edge is not ideal.

The Air-Wave switch activates when a wave of air is compressed through an air hose and triggers the internal diaphragm. This converts the pressure wave into an electrical contact, which signals the commercial door operator to stop and/or reverse motion. Air-Wave switches have adjustable sensitivity and are available in three models to suit each unique application.

Air-Wave switches are compatible with Air-Wave configured sensing edges and treadles, and are non-monitored.

The Miller Edge Air-Wave switch was developed for applications such as extremely wet and/or refrigerated areas subject to condensation, cold climates, high vibration environments, and other areas where a monitored electric sensing edge is not ideal.

The Air-Wave switch activates when a wave of air is compressed through an air hose and triggers the internal diaphragm. This converts the pressure wave into an electrical contact, which signals the commercial door operator to stop and/or reverse motion. Air-Wave switches have adjustable sensitivity and are available in three models to suit each unique application.

Air-Wave switches are compatible with Air-Wave configured sensing edges and treadles, and are non-monitored.