Home > ACCESS CONTROL > RADIO CONTROLS > MULTICODE >

Linear - Multicode 3028-50 Receiver 12/24 AC/DC 2-Channel

Linear - Multicode 3028-50 Receiver 12/24 AC/DC 2-Channel
 

List Price (Members Only)


Product Code: 302850
Qty:

Description
 
The Model 302850 is a dual frequency receiver. An internal jumper selects either 300 MHz or 310 MHz operating frequency. The 300 MHz frequency is compatible with standard Multi-Code transmitters, the 310 MHz frequency is compatible with the Stanley version Multi-Code transmitters.

The operator supplies 12-24 volt power to the receiver, or the receiver can be powered by a separate AC power transformer or DC power supply. The normally open relay outputs can switch up to 1 amp @ 30 VAC. 3-foot, 2-conductor wire leads with spade lugs are provided for attachment to the gate operator's radio activation terminals.

The receiver is programmed with a 9-position coding switch. When a transmitter set to the same code is activated, the receiver's output will activate, triggering the gate operator. Transmitter switch #10 selects which receiver channel will activate.

The Model 302850 is compatible with Multi-Code and Stanley Multi-Code transmitters only.

Features
-Operates on 12-24 volts AC or DC power
-Two channels
-Whip antenna
-3-foot antenna coax and bulkhead connector
-512 codes
-RF frequency: 300 MHz or 310 MHz (jumper selectable)
-3.625" W x 5.25" H x 1.5" D
Features
The Model 302850 is a dual frequency receiver. An internal jumper selects either 300 MHz or 310 MHz operating frequency. The 300 MHz frequency is compatible with standard Multi-Code transmitters, the 310 MHz frequency is compatible with the Stanley version Multi-Code transmitters.The operator supplies 12-24 volt power to the receiver, or the receiver can be powered by a separate AC power transformer or DC power supply. The normally open relay outputs can switch up to 1 amp @ 30 VAC. 3-foot, 2-conductor wire leads with spade lugs are provided for attachment to the gate operator's radio activation terminals.The receiver is programmed with a 9-position coding switch. When a transmitter set to the same code is activated, the receiver's output will activate, triggering the gate operator. Transmitter switch #10 selects which receiver channel will activate.The Model 302850 is compatible with Multi-Code and Stanley Multi-Code transmitters only.Features-Operates on 12-24 volts AC or DC power -Two channels -Whip antenna -3-foot antenna coax and bulkhead connector -512 codes -RF frequency: 300 MHz or 310 MHz (jumper selectable) -3.625" W x 5.25" H x 1.5" D