| Sensitivity | 10 levels, 0-9 |
| UltraMETER display | Indicates optimum sensitivity level, 0-9 diagnostic aid |
| Loop frequency | 4 settings (low, med-low, med-hi, high) |
| Loop inductance | 20-2000µH (Q factor > 5) |
| Grounded loop | Isolation transformer allows operation with poor quality loops |
| Automatic tuning | Detector tunes to loop on power-up and following frequency count function |
| Environmental tracking | Automatic compensation |
| Surge protection | Loop circuitry protected by surge suppressors |
| Detect output | Solid-state (open collector) |
| Output B | Solid-state (open collector) |
| Output B inverted | Solid-state (open collector) |
| Power / loop fault indicator | Green LED |
| Detect / frequency count indicator | Red LED |
| Detect-on-Stop | Requires vehicle to stop for a minimum of 1 second (1-2s typical) |
| ASB (Automatic Sensitivity Boost) | Increases sensitivity after initial detection to prevent dropout due to high-bed vehicles |
| Power | 12VDC-24VDC |
| Operating current | 15 mA |
| Operating temperature | -40C-82C (-40F-180F) 0-95% relative humidity |
| Dimensions (L x W x H) | 3.0"(76mm) x 0.9"(22mm) x 2.75"(70mm) |
| Weight | 0.15 lbs. (68 g) |
| Connector | 10-pin female |