The MGR-2 comes with two relays. It will operate two gates, one gate and an obstacle sensor, or two obstacle sensors. Both models come with a 9- inch local antenna, three feet of 75 ohm coaxial cable, and a bulkhead connector for locating the antenna outside the gate operator enclosure.
RF 318 MHz +/- 250 KHz; Linear MegaCode format supports ove one million factory preset codes
MGR and MGR-2 stores up to 40 transmitter codes
OUTPUTS Relay(s): MGR = 1CH and MGR-2 =2 CH; each relay is a Form C relay (NC connection available on PCB) rated at 30 V AC/DC up to 5 Amps; relay closure is approximately 3/8 of a second upon activation
INPUTS Antenna: 75 Ohm F connector
POWER 12 - 30VAC or 10.5 - 30VDC;25 mA nominal,61 mA maximum while relay is triggered
OPERATING TEMPERATURE -4F to +140F (-20C to +60C)
DIMENSIONS 3.625 in W x 5.25 in H x 1.5 in D (92 x 133 x 38 mm)
ELECTRICAL CONNECTIONS 36"22AWG wires on removable connectors:
Power: red and black wires CH1 Relay: 2 gray wires CH2 Relay: 2 yellow wires
STANDARD EQUIPMENT MGR & MGR-2; 9.5"whip antenna, 3 ft coaxial cable, bulkhead connector, mounting hardware
|