Brands

Ramset

0800-04-13 - Motor, Standard 220VAC 1HP [R5200,R5700,R3200,R3030 1,R2200]

Ramset

800-04-50 - Motor, DC 12V [BBS] DISCONTINUED

Ramset

800-28-26 - Pivot—2 1/2” x 3 1/4” (1” shaft)

Ramset

800-62-01 - Control Board [BBS] DISCONTINUED

Ramset

800-75-55 - Red Control Box Assy. (NO Battery) [BBS] (DISCONTINUED)

Ramset

800-75-56 - Red Control Box Assy. (W/Battery) [BBS] (DISCONTINUED)

Ramset

800-80-11 - RPI-TL APS 1250 W [1/2Hp Motors]

Ramset

800-80-12 - RPI-TL APS 2012 W [3/4Hp & 1Hp 120 VAC Motors]

Ramset

800-80-15 - BBS Battery Back Up System

Reno / EDI

381-1603-00 - LW-116P Orange / 16 AWG with 0.156” O.D. XLPE Insulation / Tinned Copper / For ¼” Saw Cut Loops or Larger / 1000’ Spool

Reno / EDI

380-0202-03 - LW-216 Orange / Two Conductor, Double Jacket with Tinned Copper / 16 AWG with 0.360” O.D. (+/0.020”) with XLPE Insulation / For 3/8” Saw Cuts or Larger / 2500’ Spool

Reno / EDI

381-1603-20 - LW-116P Red / 16 AWG with 0.156” O.D. XLPE Insulation / Tinned Copper / For ¼” Saw Cut Loops or Larger / 1000’ Spool

Reno / EDI

381-1600-01 - Orange / 16 AWG with 0.216” O.D. XLPE Insulation / Tinned Copper / For ¼” Saw Cut Loops or Larger / 2500’ Spool

Reno / EDI

381-1603-60 - LW-116P Blue / 16 AWG with 0.156” O.D. XLPE Insulation / Tinned Copper / For ¼” Saw Cut Loops or Larger / 1000’ Spool

Reno / EDI

381-1601-01 - LW-116S Orange / 16 AWG with 0.240” O.D. XLPE Double Jacket Insulation / Tinned Copper / For ¼” Saw Cuts or Larger / 2500’ Spool

Reno / EDI

381-2000-02 - LW-120 Black / 20 AWG / XLPE Insulation / Tinned Copper / For 1/8” Saw Cut Loops or Larger / 1000’ Spool

Reno / EDI

381-2020-02 - LW-120 Red / 20 AWG with XLPE Insulation / Tinned Copper / For 1/8” Saw Cut Loops or Larger / 1000’ Spool

Reno / EDI

418-3400-00 - 4.00 inch wide x 3 ft, long strips Mastic (Asphalt) Tape Support for PLH or PLH-R Series Prefabricated Loops.

Reno / EDI

381-2060-02 - LW-120 Blue / 20 AWG with XLPE Insulation / Tinned Copper / For 1/8” Saw Cut Loops or Larger / 1000’ Spool

Reno / EDI

390-0250-00 - BR-250 Backer Rod, Closed Cell Polyethylene Foam

Reno / EDI

390-0375-00 - BR-375 Backer Rod, Closed Cell Polyethylene Foam

Reno / EDI

801-4 - 10 Pin Harness, MS Type Connector, 4 Feet Long

Reno / EDI

801-8 - 10 Pin Harness, MS Type Connector, 8 Feet Long

Reno / EDI

802-2 - 11 Pin Harness, Amphenol Type Connector, 2 Feet Long

Reno / EDI

AVI-X1A - AVI Transmitter, 4.5” diameter, Single code

Reno / EDI

804-4 - 19 Pin Harness, MS Type Connector, 4 Feet Long

Reno / EDI

AVI-XS1 - AVI Transmitter, 2.5” diameter, Single code, Designed for motorcycle or smaller vehicle applications.

Reno / EDI

804-8 - 19 Pin Harness, MS Type Connector, 8 Feet Long

Reno / EDI

AVI-B SERIES - 1 Channel Receiver Unit. Receives unique transmitter code from either AVI-X1A or AVI-XS1 transmitters

Reno / EDI

AX2-2C SERIES - 2 Channel Detector, 1 Programmable Relay per channel, 2 Connectors, External DIP Switches (Box Enclosure Type)

Reno / EDI

BT-AVI SERIES - 1 Channel Receiver & Vehicle Detector in one enclosure

Reno / EDI

AX2DL-2C SERIES - 2 Channel Detector, Directional Logic, 1 Relay per channel, 2 Connectors, External DIP Switches (Box Enclosure Type)

Reno / EDI

B SERIES (10 PIN TYPE) - 1 Channel Detector, 2 Programmable Relays, 10 Pin MS Type Connector, Internal DIP Switches (Box Enclosure Type)

Reno / EDI

B SERIES (11 PIN TYPE) - 1 Channel Detector, 2 Programmable Relays, 11 Pin Amphenol Connector, Internal DIP Switches (Box Enclosure Type)

Reno / EDI

DL-ATG-1 - 2 Channel Detector, 2 Outputs, Directional Logic, 120VAC, 1 CL-2.5 Calibration Loop

Reno / EDI

DL-ATG-2 - 2 Channel Detector, 2 Outputs, Directional Logic, 120VAC, 1 CL-2.5 Calibration Loop